LIGHTING PRODUCTS

ISD Series Battery Packs from IOTA Engineering provide emergency operation for linear and fluorescent lamps. ISD Emergency Battery Packs provide 1300 lumens of emergency illumination, and automatically conduct the 30-second monthly and 90-minute annual tests required by code. If the ISD Emergency ballast encounters a problem with the lamp, charging circuit, or inverter circuit, the unit will signal an alert via a flashing indicator light and audible beep.

IOTA’s IIS Series Inverter Systems offer ideal emergency solutions for today’s LED lighting loads of 125W to 375W. Avoid the challenge of varying LED requirements by implementing a central inverter unit that will provide the emergency power that’s right for your load. A properly-sized unit can meet all the demands of your emergency fixtures for indoor and outdoor paths of egress. With the capability to operate incandescent and fluorescent fixtures as well as LEDs, the IIS Series provides specifiers with a simple UL 924 Listed solution for multiple fixtures.

LiteStream C wireless controllers are easy to install for IoT applications in need of multi-channel, dimming, color tuning, zone, and RGB control capabilities. With a high power density of 30W/cubic inch, LiteStream C can be added at the output of any standard constant voltage LED driver. These controllers are compatible with smart home apps and are offered in three models: 1-channel for dimming, 2-channel/200W for color tuning, and 5-channel/300W for RGB+W controls. LiteStream’s innovative products are designed to maximize the reliable, secure, robust and user-friendly experience that you’ve come to expect from LTF products.

The Illuminator LVM Series of mini inverters is an easy solution for emergency power needs. Designed with Myers EPS’ advanced Pure Sine Wave technology, the mini inverters provide direct AC power and full illumination to all lighting sources including LED, fluorescent, HID quartz and screw-based LED lamps. With an ultra-wide .5 lead to .5 lag load power factor range, Myers EPS inverters offer unmatched compatibility, allowing existing fixtures to be used for both normal operation and emergency lighting without affecting the aesthetic design of the space. UL 924 Listed.

Capacity and Dimensions

Wall Mount: 110VA: 14.75" H x 16.25" W x 3.5" D

Wall Mount: 225VA: 23.25" H x 16.25" W x 3.5" D

Grid Mount: 110VA & 225 VA: 7.5" H x 23.875" W x 8" D

The Assurance Emergency Lighting L Series emergency LED Drivers are the best choice for applications using LED boards or arrays operated by an external Class 2 AC driver. Our Constant Power Emergency LED drivers can be installed inside, on top of, or remotely from a fixture to operate a single fixture during an emergency operation. When normal AC power fails, the Assurance emergency LED drivers switch into emergency mode and support LED fixtures for 90 minutes. When AC power is restored, the emergency drivers automatically return to the charging mode. Numerous L Series emergency LED drivers are available for different applications and mounting heights to meet life safety codes.

The AC-SERIES is the most compact magnetic core dimmable transformer on the market making it the perfect choice for landscape and other indoor or outdoor lighting applications. Encased in a high-quality metal enclosure that includes multiple ¨þ" knock-outs for easy installation, each unit is equipped with circuit breakers to protect both the driver and the load. All of our magnetic transformers are phase dimmable with any standard leading edge MLV TRIAC dimmer and come in both Class 2 and higher power single channel options.

The AFLEX Linear platform offers the unparalleled ability to program the drivers power in addition to the output current, dimming curve, dim-to-off functionality, NTC settings and more all while maintaining high efficiency over the programmable range. This unique technological advancement enables both ultimate design flexibility and significant SKU elimination. Programming the driver does not require any power and can be done in less than one second. The available auxiliary output provides a power source for sensors and/or cooling devices, eliminating the need for an additional power supply. The AFLEX driver is 0-10V dimmable down to 0.1% with any 0-10V dimmer. Unequaled flexibility and performance along with Class P approval and Title 24 compliance makes the AFLEX driver the perfect choice for any commercial lighting fixture application.

Series CBM emergency lighting system from Signtex Lighting comes with automatic email reporting of mandated diagnostic tests as standard equipment, providing automatic compliance with Life safety Codes.This advanced patented system uses low voltage DC distribution and solves the problem of battery maintenance by providing instant notification of any fault to up to six email addresses and allowing battery changeout in minutes by in-house maintenance personnel, without special tools, ladders or factory training. Replacement SLA batteries are standard models available from any local commercial distributor. Initial cost is competitive with alternates, and operating life cycle costs are lower than any other emergency lighting system.

The CCT SERIES is an electronic Class 2, phase dimmable LED driver with a low profile, compact hard plastic case that is perfectly sized for any lighting fixture application. The driver features auto reset, over current and short circuit protection as well as an efficiency over 90% resulting in low operating case temperature. The CCT SERIES driver is phase dimmable with both leading and trailing edge TRIAC dimmers.

Myers EPS offers a full line of three phase emergency lighting inverters that provide up to 50kVA/kW of backup power for larger facilities and campuses. The series is compatible with any type of lighting load and it features a rock-solid design with 2x rating of all critical components. The series works with all lighting loads at cold starts for all normally off circuits or regular normally on circuits. All test and diagnostics are performed and recorded automatically, reducing maintenance costs.

Sizes: 4.8kVA, 6kVA, 8kVA, 10kVA, 12.5kVA, 16.7kVA, 24kVA, 33kVA, 40kVA & 50kVA

Myers EPS Illuminator Series CR is an emergency lighting inverter available in single phase for installation outdoors. The inverter transfers to emergency mode within two milliseconds when utility power is lost, which allows the system to support all types of lighting loads including LED and HID. The outdoor-rated cabinet facilitates installation in remote locations and where space in not available indoors. Based upon more than 30 years of engineering and manufacturing expertise, the CR Series combines all of the features that deliver reliability, versatility and ease of operation and maintenance with the latest technology to create an industry-leading solution.

Sizes: 3.0kVA, 4.0kVA, 5.0kVA, 6.5kVA and 8.0kVA

ELC is a compact device that converts any LED luminaire from normal to emergency operation when normal power fails. Includes a dedicated driver to operate the luminaire in emergencies even if the normal driver fails and works with any lighting control system. ELC contains no battery and is powered from the Signtex central battery system at 24VDC. Lumen output is calculated precisely for emergency light levels required by codes. Models are available to operate a wide range of LED fixtures including troffers, architectural, down lights, linear lighting and hi bays with a power range from 5W to more than 400W. UL Listed for field or factory installation.

The Exitronix LBDX Series LED Backup Driver is specifically designed to provide emergency lighting of LED fixtures with the loss of power. The unit’s low-profile configuration makes the series suitable for most pre-installation and on-site applications requiring emergency illumination.

LTF’s UniDriver series of LED power supplies feature our innovative universal input and are true tri-mode dimmable at all input voltages, simplifying driver selection for OEMs and specifiers throughout the lighting industry. Designed for reliable performance and high durability, UniDrivers offer input from 110V to 305V coupled with flicker-free dimming that includes Triac, ELV and 0-10V, and constant current or constant voltage models from 3W to 300W. Indoor and outdoor models, dozens of available form factors, and a five-year warranty also help to make UniDrivers one of our most popular products.

The Assurance Emergency Lighting ALCR Devices can be used as Automatic Load control or Bypass devices to turn on emergency lighting loads from generators or inverters in the event of normal power interruption. Several models are available for installation either inside or external to the luminaire. They are also compatible with 0-10 Vdc dimming systems and allow the normally dimmed luminaire to turn on to full power during the emergency operation.

The X-SERIES is a multi-tap magnetic dimmable transformer making it the perfect choice for landscape and other indoor or outdoor lighting applications. Encased in a high-quality metal enclosure that includes multiple ¨þ" knock-outs for easy installation, each unit is equipped with push-to-reset breakers, one on each output, to protect both the driver and the load. All of our magnetic transformers are phase dimmable with any standard leading edge MLV TRIAC dimmer.

The Bodine GTDU generator transfer device has Bodine ingenuity embedded within, with upgrades and features with the user in mind. The GTDU is the first generator transfer device designed with a dual Listing to UL 1008 and UL 924, it offers the smallest form factor for a UL 1008 device and provides other upgraded features. like 0-10V dimming control override, universal input 120 through 277 VAC, 50/60 Hz, reduced AC line current and power consumption and 24VDC fire alarm override capable.

IOTA has expanded its popular emergency inverter line to include large IIS Central Inverter Systems capable of servicing emergency lighting requirements up to 50kVA. The new IIS Central Inverter Systems combine the benefits of inverter auxiliary systems with IOTA’s trusted performance and expertise in emergency lighting applications. IOTA Central Inverter systems offer several emergency solutions to meet the demands of varying lighting applications such as capacity requirements, load technology, voltage specifications, physical and environmental considerations, and desired performance

Myers EPS Illuminator IE is a central inverter system for emergency lighting. Breakthrough design features one cabinet construction for systems up to 16.7kVA/kW, reducing footprint and installation costs. With a wealth of advanced communications features, the Illuminator IE offers unmatched convenience. This series is designed for fluorescent, quartz, LED and incandescent normal on and/or normal off lighting loads and those applications that require normal off (emergency only) lighting loads. UL 924 Listed.

Sizes: 1.5KVA, 2.25KVA, 3.0KVA, 3.75KVA, 5.0KVA, 6.0KVA, 8.0KVA, 10.0KVA, 12.5KVA and 16.7KVA

The E-SERIES listed is an electronic Class 2, phase dimmable LED driver with a low profile aluminum case making it the perfect choice for tape lighting, kick/cove lighting, under cabinet lighting and multiple other residential and commercial lighting applications. The UL Listed enclosure includes a wiring compartment with two ½" knockouts for easy-installation, eliminating the need for a separate junction box. The driver features auto reset, over current and short circuit protection as well as an efficiency over 90% resulting in low operating case temperature. The E-SERIES is phase dimmable down to 1% with both leading and trailing edge TRIAC dimmers.