LIGHTING PRODUCTS

Aleddra’s T5 LED Integrated (T5N) Lamps are designed to perform efficiently in conditions where fluorescent, halogen and low voltage luminaires have traditionally been used. Our lamps incorporate integral drivers, are self-supporting, and can be surface-mounted. Individual units can be chained together, making a desirable illumination space. Instant start within one second once power on. T5N Lamps connect directly to line voltage and can be used in any interior space. Ideal for under-cabinets in kitchen, offices, schools, hospitals, grocery stores and more. Installation Kit included: T5-EC, 12” T5 power connector, clips, self-tapping screws and plastic anchors.

Aleddra introduces Emergency Battery Pack (EMB Series) for indoor LED fixtures. It provides 15W /30W emergency power for a minimum of 90-minute emergency operation. During power outage, the emergency battery pack automatically draws power from its built-in battery and lasts more than 90 minutes on battery. With its price point, this Emergency Battery Pack is the most cost-effective emergency lighting option for indoor applications. It is installed inside the housing of the LED fixtures.

At only 1.5 watts per foot, the PrimaLine 1.5 LED Tape Light offers the perfect level of brightness for ambient and close application task lighting including shelves, cabinets, toe kicks, soffits, and coves. PrimaLine 1.5 is one of Alloy LED’s lowest-heat and most efficient dimmable LED linear lights with maximum run lengths of 67 feet (24V) and 34 feet (12V).

EarthTronics introduces a new 12-watt LED, LPD12/G24Q/830 to easily replace 18-watt G24q-2 base compact fluorescent lamps (CFL) that increases energy savings and performance life. Saving 33 percent more energy than the CFLs, the LED Plug In illuminates identically to the CFL it replaces. The lamp produces 1100 lumens and works directly on existing instant start electronic ballasts for easy “plug and play” installation. No rewiring is necessary. The 12-watt Plug In is available in 3000K, 4000K and 5000K colors with a color rendering index (CRI) greater than 80. The product design replicates the look of the lamp is it replacing and provides a similar light distribution. No modifications to the fixture are required. For use in office, hotel, restaurant, retail and all commercial applications where plug in CFL lamps are used. It can be used in any rotation or orientation in open or enclosed fixtures. With its ability to provide instant on and full brightness without delay, the LED Plug In is ideal for outdoor flood lights, post lamps, recessed downlights, surface mount ceiling fixtures, wall fixtures, vanity fixtures and wall sconces.

Megaman has added new lamps to the offering. Introducing the new 3W G25 LED Filament lamp! This energy efficient lamp features tinted glass and 360-degree beam distribution. Available in 2200K with a CRI of 80 in E26 and GU24 base options. High CRI lamps are now available! These lamps feature a CRI of 95 and are available in 3000K. Currently available in the 18W PAR38 and the 8W MR16.

The Cree LRP-38 delivers amazing breakthroughs in optical, electronic, mechanical and thermal technology. Designed to replace halogen PAR38s and powered by Cree TrueWhite® Technology, the LRP-38 is a great solution for directional lighting in many applications, like museums, furniture stores, grocery and retail stores. No compromise.

• Saves Energy: 600 lm @ 2700K, replaces 75W PAR38 with 11W

• No Compromise: High efficiency at 55 LPW with 94 CRI

• Long Life: Designed to last 50,000 hours with consistent color (35k non-IC)

• Versatile: Dimmable to 20% with 20° beam angle, 4800 CBCP

The 9-watt A19 omni-directional EarthBulb LED provides 810 lumens and replaces a standard 60-watt incandescent bulb and lasts 40,000 hours. It offers a 300 degree beam angle for full radial illumination. Pleasing soft white 2700K color temperature is standard. The A-shape LED is designed for fan lights, table and floor lamps, decorative fixtures and wall sconces. EarthTronics also offers models to meet California Energy Commission (CEC) standards.

EarthTronics 12 watt LED, LPD12/G24Q/830 easily replaces 18 watt G24q-2 base compact fluorescent lamps and provides 33% energy savings. It is physically the same form factor as the CFQ18W/G24Q that it replaces. This 4-pin lamp produces 1100 lumens and works directly on the existing instant start electronic ballast. No rewiring necessary. Instant on, no warm up time and a long service life make this lamp an easy choice in many applications. Available colors include 3000K, 4000K and 5000K and the CRI rating is >80. The unique design illuminates nearly identically to the bulb it replaces and can be used in any rotation or orientation in open or enclosed fixtures. The 25,000 hour rated life provides 2 to 3 times the service life of the compact fluorescent lamp it replaces.

OmniSheet™, our flagship LED light engine featuring state-of-the-art embedded LED design. With a slim 4mm thickness, OmniSheet™ delivers superior light distribution and exceptional color rendering, perfect for diverse applications. Experience lighting excellence, designed for optimal performance in your space.

The 7-watt A19 omni-directional EarthBulb LED provides 480 lumens and replaces a standard 40-watt incandescent bulb and lasts 40,000 hours. It offers a 300 degree beam angle for full radial illumination. Pleasing soft white 2700K color temperature is standard. The A-shape LED is designed for fan lights, table and floor lamps, decorative fixtures and wall sconces. EarthTronics also offers models to meet California Energy Commission (CEC) standards.

EarthTronics, dedicated to developing innovative energy-efficient lighting products that provide a positive economic and environmental impact, introduces its new LED Color Changing Panels with a unique high-definition color tunable design to precisely adjust both the color temperature and the light level in office, retail, educational and commercial applications. The LED Color Changing Panels can be fine-tuned from a warm 3000K color experience to a cool, natural 5000K color. The panels can be easily addressed and linked together in several configurations with one control capable of operating up to 250 fixtures. Light level can be adjusted from a smart phone or optional handheld control. There is no need to run extra wiring for hardwired dimmer controls. Available is three sizes for typical drop ceiling applications, the 40-watt 1’x4’ and 2’x2’ LED Color Changing Panels produce up to 4100 lumens, while the 50-watt 2’x4’ unit provides up to 5200 lumens. They are ideal for classrooms, boardrooms, offices, retail spaces and any other location where the ability to select a changing color temperature is necessary to increase visual comfort.

The new HID Replacement LED Filament Lamps offer an easy and short payback solution to replace High Intensity Discharge (HID) lamps. They bring all the energy efficiency and long-life benefits of LED to HID replacement, while providing instant savings from a low initial investment. These lamps are designed with an optimal lamp size as well as light distribution with a familiar look and feel as conventional HID lamps. What sets them apart is the innovative High-Power LED filament technology enclosed in a glass bulb, ensuring a distinctive lighting experience. They are easily retrofit for outdoor and indoor applications.

Featuring Dim-to-Warm LED technology, the Varien series allows users to smoothly dim from a 3000K warm white color temperature to 1800K, creating a rich, warm glow similar to candlelight, meeting specific application needs. Varien 5.5 is ideal for accent applications that require more surface illumination like short throw task lighting.

EarthTronics introduces high lumen, high efficiency LEDs as an energy-efficient solution for replacing High Intensity Discharge lamps (HID) for interior and exterior applications in parking garages, site and security lighting, high bay warehouse fixtures and post lights. These commercial quality lamps feature high-power LED, durable construction and advanced electronic drivers that provide extended performance life and full omni-directional light output. EarthTronics high lumen, HID replacement LEDs offer 50,000-hour rated life, 5-year warranty and energy savings that exceeds 80 percent to provide a solid return on investment. The EarthTronics high lumen, HID replacement LEDs are available in 36-, 54- and 120-watt sizes providing 4500, 6400 and 14,200 lumens respectively. All feature full radial illumination to simulate the HID lamps they are replacing and to fully utilize existing fixture optics. These lamps easily replace 100 watt to greater than 400 watt HID lamps. Designed for efficiency, the EarthTronics high lumen LED lamps include an efficient electronic driver that operates on either 120 or 277 volt systems. Simply remove the existing HID lamp ballast from the energy equation. The EarthTronics HID replacement LEDs are available with medium or mogul screw bases to fit various fixture types.

Cree’s LRP38-10L delivers the industry’s highest efficacy in a PAR38 form factor and is tuned to optimal color point before shipment, making it perfect for directional lighting applications like museums, architectural accents and retail stores —anywhere color matters. Powered by Cree TrueWhite® Technology, the LRP38-10L is designed to replace halide and halogen PAR38s. No compromise.

• Saves Energy: 1000 lm @3000K, or 950 lm @2700K, replaces 90W PAR38 with 13.5W

• No Compromise: High efficiency at 74 LPW with 92 CRI

• Long Life: Designed for 50,000 hours with consistent color

• Versatile: Dimmable to 20%; 12°/25°/40° beam angles

The next generation PrimaLine Gen 2 LED family features the high-efficiency 2835 diode package, offering super-high light output up to 835 lumens per foot, making it ideal for primary and large application accent lighting. PrimaLine 6.6 has a narrow design and its two rows of chips makes installation quick and simple. The evenly spaced dense diode placement provides a smooth, even line of light.

Duralamp, a brand of Targetti, now offers a color changing strip with both color tunable white and full spectrum dynamic RGBA all combined in one linear strip. Introducing Duratape Extreme Tunable CCT.

The Radialux 5.9 RGB-W LED Tape Light features Alloy LED’s innovative technology of the 4-in-1 5050A diode. Traditional RGB-W lighting alternates separate RGB 5050 and white diodes. The 4-in-1 5050A mixes R, G, B, and W in a single diode package for a brighter light using fewer watts and better blending.

The PrimaLine 4.4 XT Gen 2 LED Tape Light is a very high output, extended run LED light that supplies the perfect level of brightness for large rooms, overhead lighting, and long-run applications. Providing a smooth line of dimmable linear LED light, the PrimaLine XT series of 24V LED Tape Lights features an unmatched combination of features including extended maximum run lengths of 40 feet, saving installation costs by eliminating the need for multiple home runs.

The PrimaLine 2.7 LP 24V LED Tape Light is a very low profile, medium output, dimmable LED light designed to emit a smooth, continuous illumination. When installed in Alloy LED’s aluminum channels with a frosted diffuser cover, PrimaLine 2.7 LP provides hotspot-free light, even on high-gloss counters and surfaces.