LIGHTING PRODUCTS

The 8200 series LED floods are designed to provide long lasting energy efficient illumination even in the most demanding environments with an IP67 rating that is superior to most other floodlights. This unit uses a red, green and blue (RGB) LED array to create DMX512 controlled color-changing effects.

These downlight fixture families offer general lighting with the same excellence customers expect from Solais. Modular 3-, 4-, and 6-inch round and square downlight families feature universal and fixed down housings with field-replaceable LED modules for ultimate versatility, consistency in light and a low cost of ownership.

Formal purity and luxurious with its imposing size, EMPRESS brings a gentle diffused indirect light and quiet sophistication to your interior space. Available in suspension, ceiling surface or wall mount and 2 diameters (22" and 35").

A suggested replacement for up to 1,000 watt metal halide sources, the TPS3 Floodlight is the largest in a series of axial styled floodlights designed to use the latest in LED technology. The TPS floodlight family provides a consistent style and superior performance for floodlighting applications over a wide range of applications. With its robust die-cast housing, durable powder coat finish, and patent pending taper lock yoke design, this fixture was designed to meet the most demanding of lighting installations.

The Award Winning Micro Well light is a state-of-the-art high performance LED luminaire. It features silicone O-rings and grommets ensuring the fixture remains hermetically sealed. The LMWL is packed with features, yet maintains a small size. The interchangeable optic assembly can be raised high for uninhibited light distribution, or can be regressed into the fixture a full 1" hiding the light source. Additionally, the eyeball style adjustability of the Micro Well allows for the optic assembly to tilt 18° to the side, rotate a full 360°, and lock into place once aimed.

The LZ ZOOM Luminaire is a compact, stemmed spotlight designed with zoom functionality to allow the beam to be easily adjusted from a 5 degree narrow spot to a 50 degree flood. Powered by a COB LED, the luminaire features unmatched optical performance with 25,000 CBCP at 5 degrees, using only 19 watts.

Arkilight Orienta developed as asymmetric highlight effect and general lighting solution • Easy to integrate low level lighting solution • To be recessed mounted in architectural and furniture details • Flexible modularity with linear, 45 degree, ‘L’ shaped and angled alignment accessories • Polycarbonate diffusers grant dotless visual experince with high level light transmission • Optimum heat dissipation performance for high lumen LED strips and LED modules • High quality aluminium alloy with premium anodized finish • Various finishing options such as anodizing and customized RAL finishing • Orienta LED profiles configured with dedicated accessories and end caps

Kim Lighting’s WARP9 LED was designed to disappear from the site, camouflaged within its surroundings, avoiding detection from daytime visual perception. WARP9 LED site and street lighting with Kim Lighting’s exclusive MicroEmitter LED technology harnesses the brightness from the latest diode potency to collect and widely distribute light precisely and efficiently without objectionable glare or hot spots. Combined with a rugged, visually stealth housing, an upgradeable LED module, and progressive warranty protection, WARP9 LED is the modern, energy efficient, truly sustainable LED lighting solution with Type III and Type V, 5000K are DLC approved serving your community for decades.

The Square8 is a Housing/Lens combination providing exceptional glare control and a wide distribution. The rounded-square shape of the Square8 ensures good impact strength with a pleasant appearance. The upper housing is made from high impact white polycarbonate suitable for dissipating 26w at 40ºC (depending on mounting style and driver). The enclosure is IP66 rated. A knock-out on each side accommodates conduit, occupancy and/or wireless sensors. Knock-outs on the top provide mounting to standard J-Boxes. Integral or installed gaskets are options.

The Trace-Lite ECX Series square LED canopy luminaire has a highly durable design that delivers affordability and energy efficiency to any canopy application. It is available in two configurations and features three field-selectable lumen packages and three field-selectable color temperatures. The ECX is constructed with a die-cast aluminum housing and a Fresnel lens that offers 160° distribution and IK10 impact resistance. Optional battery backup kit and sensor are available. The ECX Series is ideal for indoor or outdoor applications including parking garages, schools, office complexes, light commercial development, apartments, walkways, entryways, and stairwells.

Kim Lighting’s GEM Bollard LED is designed to produce high levels of luminance along with an attractive lens presence, which produces a point of interest and attracts attention. GEM Bollard LED is particularly well suited where bollards are used to identify and highlight entries or important walkways. Precision molded tempered glass refractor spreads light evenly in the beam pattern and eliminates shadows from the luminaire’s support structure. Specifying the GEM Bollard LED allows end users to capitalize on stimulus funds, regional rebates and achieves LEED certified points! Meets Buy American Act and NAFTA requirements.

The patent-pending extruded cross section of K-Beam was designed to minimize the number of support cables and significantly reduce overall installation cost. K-Beam provides a two-circuit, 120V track channel that accepts Lumenture and other J-Type fixtures. A stabilizing rod included in each suspension kit further increases system stability and alignment. The 14-gauge aluminum channel contains two line (hot) conductors and one common neutral. Circuit selection is done on each fixture and allows for simple adjustment of lighting effects. Nominal length track sections can be field-cut for an exact fit.

The Profile column light casts a wash of light down the recessed channel of the light’s I-beam column. A 10’-high unit can be specified with 2’-high add-on sections with a maximum height of 16’. Further tailor the column light’s aesthetic with optional foot lights.

Juno® MD1LG2 RD Series Mini LED Downlights open-up a multitude of task and accent lighting possibilities, especially when installation space is at a premium. These second generation recessed Mini LEDs still require only 5-watt input but now feature 50% higher lumens to produce brilliant white light, exceeding the performance of a conventional 20-watt, MR11 light source. Juno Mini LED Downlights can squeeze into the tightest of places and are perfect for niches, bookcases, soffits, displays, elevators or any tight space.

For municipal streets, downtown business improvement, residential streets, campuses, parks, walkways and parking lots. Post Top Full Cutoff LED luminaires from Holophane allow designers to create the vintage appearance they desire while complying with local lighting ordinances for reduced sky glow. The product series includes lantern-style Utility Arlington®, Utility Postop and Utility Washington Postlite® LED luminaires and represents the broadest portfolio of IESNA Full Cutoff post top products in the industry. Multiple lumen packages are available in three color temperatures as well as symmetric and asymmetric distributions. The utility-grade Full Cuttoff Series from Holophane provides the efficiency and sustainability you need with high performance and reliability. UL listed.

Spin is concentric parabolic reflectors that create a simple and elegant direct and indirect lighting. Spin is an ADA compliant fixture.

These recessed modules offer 35 degrees of tilt and deliver high lumens without glare. The result is superior brightness and quality from an unobtrusive fixture. DLA60 is available both in remodel with an attached junction box or with optional rough-in housings to fit any construction needs.

Multiple arm mounting options enable design flexibility when illuminating walkways or roadways. The fixture comes with tool-less access to the components for ease of maintenance and installation. Trika is a family of post-top, side-mount, bollard and wall-mount products. Trika has a contemporary aesthetic that is uniform throughout the family, offering flexibility to mix and match products to meet any design intent.

The Trace-Lite FXA Series flood lights efficiently delivers bright, white light with robust performance. Offered in a variety of sizes with lumen packages between 2000 and 50,000 lumens to fit all your project needs. Its 100,000 hours rated life significantly decreases maintenance costs over the life of the fixture. The FXA has efficacies up to 137 lumens per watt and provides over 70% energy savings compared to HID technology is designed to illuminate landscaping, pathways, building facades, long docks and a wide variety of other outdoor areas needing flood lighting. DLC® PREMIUM qualified to maximize energy savings and utility rebates.

Hi-Glo offers an elevated design vocabulary. LED cartridge technology delivers energy efficiency, high performance, longevity and economy. The Metro40 collection features a full spectrum of products from benches and bollards to bus shelters and LED lighting.