LIGHTING PRODUCTS

LTF's Low Voltage Drivers provide constant current solutions for 12V or 24V low voltage applications up to 20W, in the smallest form factors available. Often utilized in landscape lighting, track heads, pendants, and LED modules, our low voltage drivers provide full range dimming and flicker-free output. Aluminum case dissipates heat; includes auto-reset, short circuit and overload protection even when mounted in a junction box. Custom form factors available. UL recognized.

ELC is a compact device that converts any LED luminaire from normal to emergency operation when normal power fails. Includes a dedicated driver to operate the luminaire in emergencies even if the normal driver fails and works with any lighting control system. ELC contains no battery and is powered from the Signtex central battery system at 24VDC. Lumen output is calculated precisely for emergency light levels required by codes. Models are available to operate a wide range of LED fixtures including troffers, architectural, down lights, linear lighting and hi bays with a power range from 5W to more than 400W. UL Listed for field or factory installation.

Philips Advance Xitanium SR indoor LED drivers provide the digital foundation for indoor commercial connected lighting applications. They support the open-standard protocol for data exchange between the LED driver and lighting sensor/controller. A pair of low-voltage wires connect to a wide variety of certified third-party lighting sensors/controllers. Other key features include high-precision digital dimming, built-in power measurement, wireless programming (via SimpleSet), Class P listing and wide operating windows. Available in 40W and 75W models. It is easier than ever to create cutting-edge connected lighting solutions.

The Assurance Emergency Lighting Si Series emergency lighting inverters operate LED and fluorescent fixtures with pure sinusoidal power during loss of normal AC power. The Si Series inverters support emergency lighting for 90 minutes in accordance with life safety code requirements. All Si Inverters can be derated for 2 hour run time.

The E-SERIES listed is an electronic Class 2, phase dimmable LED driver with a low profile aluminum case making it the perfect choice for tape lighting, kick/cove lighting, under cabinet lighting and multiple other residential and commercial lighting applications. The UL Listed enclosure includes a wiring compartment with two ½" knockouts for easy-installation, eliminating the need for a separate junction box. The driver features auto reset, over current and short circuit protection as well as an efficiency over 90% resulting in low operating case temperature. The E-SERIES is phase dimmable down to 1% with both leading and trailing edge TRIAC dimmers.

The X-SERIES is a multi-tap magnetic dimmable transformer making it the perfect choice for landscape and other indoor or outdoor lighting applications. Encased in a high-quality metal enclosure that includes multiple ¨þ" knock-outs for easy installation, each unit is equipped with push-to-reset breakers, one on each output, to protect both the driver and the load. All of our magnetic transformers are phase dimmable with any standard leading edge MLV TRIAC dimmer.

The LINDRIVE is an electronic Class 2, phase dimmable LED driver with a low profile hard plastic case making it the perfect choice for lower power tape lighting, kick/cove lighting, under cabinet lighting and multiple other residential and commercial lighting applications. The ETL Listed enclosure utilizes covered, side feed terminal blocks for easy wiring and installation, eliminating the need for a separate junction box. The driver features auto reset, over current and short circuit protection as well as an efficiency over 90% resulting in low operating case temperature. The LINDRIVE SERIES is phase dimmable with both leading and trailing edge TRIAC dimmers.

The ILB Series Emergency Battery Packs from IOTA Engineering offer 90-minute emergency operation for LED fixtures in the event of a loss of power. The ILB Series includes models for operating LED loads up to 5, 7 and 12 watts at input voltages up to 12 and 24 volts. IOTA ILB Battery Packs are UL Recognized components and include test switch and charge indicator accessories, a long-life recyclable Ni-Cad battery, and a 5-Year Warranty.

IOTA® offers new 10-watt and 15-watt constant power emergency LED driver solutions featuring advanced low-profile technology. IOTA ILBLP CP10 and ILBLP CP15 emergency drivers deliver confident emergency illumination for Class 2 LED luminaires while using lithium battery designs to dramatically reduce both size and weight by up to 30%. These reduced enclosures simplify the process of incorporating powerful emergency functionality into minimal LED fixtures with limited compartment space. Low-Profile models are available in dual flex, no-flex, and narrow profile configurations to accommodate individual fixture requirements, and include self-diagnostic capability and high-efficiency energy performance.

Philips Advance Xitanium SR outdoor LED drivers provide the digital foundation for many outdoor commercial connected lighting applications. They support the open-standard protocol for data exchange between the LED driver and lighting sensor/controller. In addition, 24V DC auxiliary power supply(3W) is provided. Other key features include high-precision digital dimming, built-in power measurement, wireless programming (via SimpleSet), Class P listing and wide operating windows. Available in 75W, 95W, 150W, and 180W (soon). You now have unparalleled flexibility to choose from a wide variety of certified third-party smart sensors for your outdoor lighting projects.

The EZJ-BOX SERIES features select Magnitude Class 2, electronic LED drivers integrated into a simple surface mounted, multi-channel junction box making it the perfect product for multi-output needs in tape lighting, tube lighting, linear lighting and multiple other residential and commercial lighting applications. The high-quality metal, UL Listed junction box includes multiple ¨þ" knock-outs and comes pre-wired for quick and easy installation.

The E-SERIES Recognized is an electronic Class 2, phase dimmable LED driver with an extremely compact, low profile aluminum case making it the perfect choice for under cabinet lighting, kick/cove lighting, mirror lighting and multiple other residential and commercial lighting fixture applications. The driver features auto reset, over current and short circuit protection as well as an efficiency over 90% resulting in low operating case temperature. The E-Series Recognized is phase dimmable down to 1% with both leading and trailing edge TRIAC dimmers.

In the event of a power failure, the Assurance Emergency Lighting RHB Series fluorescent emergency ballast takes over from the AC ballast and operates 1 or 2 lamps at a reduced lumen output. Emergency ballasts must provide battery power for a minimum of 90 minutes, and must power the lamps to provide at least 1 Foot Candle of illumination on the floor. Emergency ballasts allow the same fixture to be used for both normal and emergency operation. All Commercial and Government buildings in the US are required by law to provide emergency lighting in the path of egress. Life Safety Code NFPA 101, UL924.

LED Backup Drivers to regulate the power supplied to the LED fixture to ensure that lighting is promptly, automatically provided when power fails for people to evacuate safely in a suitable time in the event of an emergency. The line of LED Backup Drivers from EarthTronics includes linear highbay, UFO highbay, vapor tight/traditional wall pack, panel/troffer, linear highbay and commercial downlight backup drivers for TLED Type B, vapor tight, linear highbay, UFO highbay, LED panels, LED troffers, traditional wall packs and commercial downlights. Listed for factory or field installations under UL924 & CSA C22.2 NO. 141, the batteries for the LED Backup Drivers provide 500 cycles of standard charge and discharge.

Myers EPS Illuminator Series CR is an emergency lighting inverter available in single phase for installation outdoors. The inverter transfers to emergency mode within two milliseconds when utility power is lost, which allows the system to support all types of lighting loads including LED and HID. The outdoor-rated cabinet facilitates installation in remote locations and where space in not available indoors. Based upon more than 30 years of engineering and manufacturing expertise, the CR Series combines all of the features that deliver reliability, versatility and ease of operation and maintenance with the latest technology to create an industry-leading solution.

Sizes: 3.0kVA, 4.0kVA, 5.0kVA, 6.5kVA and 8.0kVA

Myers EPS offers a full line of three phase emergency lighting inverters that provide up to 50kVA/kW of backup power for larger facilities and campuses. The series is compatible with any type of lighting load and it features a rock-solid design with 2x rating of all critical components. The series works with all lighting loads at cold starts for all normally off circuits or regular normally on circuits. All test and diagnostics are performed and recorded automatically, reducing maintenance costs.

Sizes: 4.8kVA, 6kVA, 8kVA, 10kVA, 12.5kVA, 16.7kVA, 24kVA, 33kVA, 40kVA & 50kVA

IOTA IIS Series Inverters provide emergency power solutions for fluorescent, incandescent, LED, and HID lighting loads. IIS Inverters operate multiple fixtures at full light output from a central battery supply for the 90 minutes required by code. IIS Inverters are perfect and cost-effective solutions for smaller spaces such as office, retail and restaurant applications where typical inverters solutions can be too expensive. Models include 125W to 375W output, and feature ceiling grid, surface mount, or recessed wall mounting configurations.

IOTA introduces the next frontier of emergency lighting with the IOTA PoE-CP12 - the first integral emergency driver for Power-Over-Ethernet (PoE) applications. The PoE-CP12 combines IOTA's patented true Constant Power performance with innovative Power-over-Ethernet input to operate today's smart LED lighting fixtures with non-diminishing emergency power. During a loss of normal PoE switch input power, the IOTA PoE-CP12 will operate the fixture from the battery supply to provide 12 watts of emergency illumination. The IOTA PoE-CP12 charges and maintains the emergency battery from the PoE switch with no interference of smart lighting data and is UL Listed for field and factory installations.

The target application for the Philips Xitanium SR Bridge is to provide wireless control of a group of light fixtures (e.g., downlights). The SR Bridge connects the 0-10V control wires from those fixtures and provides a pair of low-voltage wire that provides open standard “Sensor Ready” SR interface. The SR interface makes it easy and cost-effective to incorporate a wide variety of certified third-party lighting sensors/controllers including the Philips EasySense. This open-standard approach opens up unparalleled smart lighting design flexibility while providing high-precision digital dimming and energy monitoring capabilities.

The Assurance Emergency Lighting ALCR Devices can be used as Automatic Load control or Bypass devices to turn on emergency lighting loads from generators or inverters in the event of normal power interruption. Several models are available for installation either inside or external to the luminaire. They are also compatible with 0-10 Vdc dimming systems and allow the normally dimmed luminaire to turn on to full power during the emergency operation.