LIGHTING PRODUCTS

The ILB Series Emergency Battery Packs from IOTA Engineering offer 90-minute emergency operation for LED fixtures in the event of a loss of power. The ILB Series includes models for operating LED loads up to 5, 7 and 12 watts at input voltages up to 12 and 24 volts. IOTA ILB Battery Packs are UL Recognized components and include test switch and charge indicator accessories, a long-life recyclable Ni-Cad battery, and a 5-Year Warranty.

 IOTA ICE Series Emergency Battery Packs are designed for outdoor and cold-weather applications from minus 18 degrees to 55 degrees Celsius. ICE Series Battery Packs provide 1300 lumens of emergency illumination for both linear and compact fluorescent lamps, and feature an internal heating blanket that protects the battery pack from freezing conditions.

Series CBM emergency lighting system from Signtex Lighting comes with automatic email reporting of mandated diagnostic tests as standard equipment, providing automatic compliance with Life safety Codes.This advanced patented system uses low voltage DC distribution and solves the problem of battery maintenance by providing instant notification of any fault to up to six email addresses and allowing battery changeout in minutes by in-house maintenance personnel, without special tools, ladders or factory training. Replacement SLA batteries are standard models available from any local commercial distributor. Initial cost is competitive with alternates, and operating life cycle costs are lower than any other emergency lighting system.

The SR-SERIES is a low voltage input, electronic Class 2 phase dimmable LED driver with a compact small form factor making it the perfect choice for landscape lighting, path lighting, spot lighting and other residential and commercial lighting fixture applications. The driver has an input voltage range of 9 - 15 VDC or VAC and is available in 350mA, 450mA, and 700mA output configurations. The SR-SERIES driver is phase dimmable with both leading and trailing edge TRIAC dimmers.

The Exitronix LBDX Series LED Backup Driver is specifically designed to provide emergency lighting of LED fixtures with the loss of power. The unit’s low-profile configuration makes the series suitable for most pre-installation and on-site applications requiring emergency illumination.

Myers EPS Illuminator Series E/IE-H and CIII-H are one of the latest innovations in emergency lighting inverter technology. The Illuminator-H series is the shaker table tested and approved expansion to the industry-leading central emergencylLighting inverters. These systems meet the requirements of CBC 2010 and IBC 2009 and have been shaker table tested in accordance with ICC-ES-AC-156 procedures to an SDS level of 2.5g. In addition, the series have received OSHPD (California Office of Statewide Health Planning and Development) Special Seismic Certification, which indicates that this product meets the most rigid seismic standards currently being specified.

Sizes: 175VA, 350VA, 550VA, 750VA, 1.5kVA, 2.25kVA, 3.0kVA, 3.75kVA, 5.0kVA, 6.0kVA, 8.0kVA, 10.0kVA, 12.5kVA & 16.7kVA

IOTA introduces the next frontier of emergency lighting with the IOTA PoE-CP12 - the first integral emergency driver for Power-Over-Ethernet (PoE) applications. The PoE-CP12 combines IOTA's patented true Constant Power performance with innovative Power-over-Ethernet input to operate today's smart LED lighting fixtures with non-diminishing emergency power. During a loss of normal PoE switch input power, the IOTA PoE-CP12 will operate the fixture from the battery supply to provide 12 watts of emergency illumination. The IOTA PoE-CP12 charges and maintains the emergency battery from the PoE switch with no interference of smart lighting data and is UL Listed for field and factory installations.

The new Philips Bodine B50CT emergency ballast is designed to work with linear fluorescent and Type A TLED applications. The B50CT operates one lamp in emergency mode and, depending on the wattage and lamp selected, provides up to 1400 lumens initial emergency light output. It is compatible with 13-55W fluorescent lamps and with 7-16.5W Type A TLED lamps, including the Philips LED T8 InstantFit. Please see the product specification sheet or contact the factory for specific compatibility information and other important product details. The B50CT is UL Listed for the U.S. and Canada and meets CEC Title 20 efficiency standards. It does not replace the Philips Bodine B50 fluorescent emergency ballast.

SI series programmable drivers are an ideal solution for both enhanced flexibility and control of architectural lighting, as well as SKU reduction on the manufacturing side of OEM lighting. Able to provide constant current or constant voltage, it is the most versatile LED driver in the lighting industry. 40W to 200W models are available, offering flicker-free dimming (minimum dimming level, dimming curve and dim-to-off options are programmable). Features constant lumen output, end-of-life indicator and a rated lifetime of 50,000 hours @ Tc = 75 °C.

The target application for the Philips Xitanium SR Bridge is to provide wireless control of a group of light fixtures (e.g., downlights). The SR Bridge connects the 0-10V control wires from those fixtures and provides a pair of low-voltage wire that provides open standard “Sensor Ready” SR interface. The SR interface makes it easy and cost-effective to incorporate a wide variety of certified third-party lighting sensors/controllers including the Philips EasySense. This open-standard approach opens up unparalleled smart lighting design flexibility while providing high-precision digital dimming and energy monitoring capabilities.

LiteStream C wireless controllers are easy to install for IoT applications in need of multi-channel, dimming, color tuning, zone, and RGB control capabilities. With a high power density of 30W/cubic inch, LiteStream C can be added at the output of any standard constant voltage LED driver. These controllers are compatible with smart home apps and are offered in three models: 1-channel for dimming, 2-channel/200W for color tuning, and 5-channel/300W for RGB+W controls. LiteStream’s innovative products are designed to maximize the reliable, secure, robust and user-friendly experience that you’ve come to expect from LTF products.

LTF’s UniDriver series of LED power supplies feature our innovative universal input and are true tri-mode dimmable at all input voltages, simplifying driver selection for OEMs and specifiers throughout the lighting industry. Designed for reliable performance and high durability, UniDrivers offer input from 110V to 305V coupled with flicker-free dimming that includes Triac, ELV and 0-10V, and constant current or constant voltage models from 3W to 300W. Indoor and outdoor models, dozens of available form factors, and a five-year warranty also help to make UniDrivers one of our most popular products.

The E-SERIES Recognized is an electronic Class 2, phase dimmable LED driver with an extremely compact, low profile aluminum case making it the perfect choice for under cabinet lighting, kick/cove lighting, mirror lighting and multiple other residential and commercial lighting fixture applications. The driver features auto reset, over current and short circuit protection as well as an efficiency over 90% resulting in low operating case temperature. The E-Series Recognized is phase dimmable down to 1% with both leading and trailing edge TRIAC dimmers.

Designed for small spaces, the Illuminator LV Series of mini inverters is an easy solution for emergency power needs. Designed with Myers EPS’ advanced Pure Sine Wave technology, the mini inverters provide direct AC power and full illumination to all lighting sources including LED, fluorescent, incandescent, quartz and screw-based LED lamps. The technology provides industry-leading efficiencies, reducing the overall operating costs and a three-stage battery charger allows for extended battery life. Myers EPS inverters offer unmatched compatibility, allowing existing fixtures to be used for both normal operation and emergency lighting without affecting the aesthetic design of the space.

Capacity and Dimensions

Grid: 175VA: 7.50" H x 23.84" W x 8.0" D

Wall: 175VA: 17.75" H x 14.25″ W x 6.5" D

350VA & 550 VA: 22" H x 19″ W x 9.25" D

750VA: 22" H x 25.25" W x 9.25" D

1100VA: 25.3" H x 26" W x 10.125" D

LTF’s durable magnetic transformers are available in a variety of sizes and options to power nearly any AC outdoor landscape lighting and indoor low voltage LED or halogen system. Built using heavy duty, weather resistant stainless-steel enclosures, our transformers will stand up to the toughest elements, operating reliably for many years to come. Our efficient toroidal transformers are designed for durability, energy savings, and no humming noise. UL Listed. Photocell, timer, and four-zone wireless Bluetooth/WiFi control are additional options. 75W to 900W options; 25-year limited warranty.

Advance Xitanium Linear LED Drivers with ComfortFade and Auxiliary Port are designed to provide ultimate flexibility. These models are compatible with standard 0-10V dimming systems to deliver reliably smooth dimming performance down to a minimum of 1%. Enabled with SimpleSet technology, these drivers offer the needed flexibility and performance for the application with precise tuning of drive currents, selectable dimming curves and adjustable minimum dimming levels. With wide operating windows, slim profile and simple current adjustability, the drivers make it easy for luminaire manufacturers to design linear fixtures with desired lumen levels to suit the application.

The CCT SERIES is an electronic Class 2, phase dimmable LED driver with a low profile, compact hard plastic case that is perfectly sized for any lighting fixture application. The driver features auto reset, over current and short circuit protection as well as an efficiency over 90% resulting in low operating case temperature. The CCT SERIES driver is phase dimmable with both leading and trailing edge TRIAC dimmers.

LED Backup Drivers to regulate the power supplied to the LED fixture to ensure that lighting is promptly, automatically provided when power fails for people to evacuate safely in a suitable time in the event of an emergency. The line of LED Backup Drivers from EarthTronics includes linear highbay, UFO highbay, vapor tight/traditional wall pack, panel/troffer, linear highbay and commercial downlight backup drivers for TLED Type B, vapor tight, linear highbay, UFO highbay, LED panels, LED troffers, traditional wall packs and commercial downlights. Listed for factory or field installations under UL924 & CSA C22.2 NO. 141, the batteries for the LED Backup Drivers provide 500 cycles of standard charge and discharge.

LTF's Low Voltage Drivers provide constant current solutions for 12V or 24V low voltage applications up to 20W, in the smallest form factors available. Often utilized in landscape lighting, track heads, pendants, and LED modules, our low voltage drivers provide full range dimming and flicker-free output. Aluminum case dissipates heat; includes auto-reset, short circuit and overload protection even when mounted in a junction box. Custom form factors available. UL recognized.

The E-SERIES listed is an electronic Class 2, phase dimmable LED driver with a low profile aluminum case making it the perfect choice for tape lighting, kick/cove lighting, under cabinet lighting and multiple other residential and commercial lighting applications. The UL Listed enclosure includes a wiring compartment with two ½" knockouts for easy-installation, eliminating the need for a separate junction box. The driver features auto reset, over current and short circuit protection as well as an efficiency over 90% resulting in low operating case temperature. The E-SERIES is phase dimmable down to 1% with both leading and trailing edge TRIAC dimmers.