LIGHTING PRODUCTS

Myers EPS Illuminator Series CR is an emergency lighting inverter available in single phase for installation outdoors. The inverter transfers to emergency mode within two milliseconds when utility power is lost, which allows the system to support all types of lighting loads including LED and HID. The outdoor-rated cabinet facilitates installation in remote locations and where space in not available indoors. Based upon more than 30 years of engineering and manufacturing expertise, the CR Series combines all of the features that deliver reliability, versatility and ease of operation and maintenance with the latest technology to create an industry-leading solution.

Sizes: 3.0kVA, 4.0kVA, 5.0kVA, 6.5kVA and 8.0kVA

The Lithonia Ligthing® EXG/EXR LED Exit Signs are suitable for emergency lighting applications such as stairways and hallways. This fully assembled single-face exit with extra faceplate is available in red and green letters. Its low profile makes it ideal for safely illuminated the path of egress in small spaces and can be wall or ceiling mounted. The emergency power provides 90 minutes of illumination in the event of a power loss.

The safety-focused LED Emergency Light is the first of it’s kind designed specifically for high bay applications. In times of power loss, it delivers 90 minutes and 4,000 lumens of illumination and visibility, helping occupants navigate their way to safety. It’s unique, patent-pending design enables compatibility across a range of input voltages, from 120V to 480V without the use of a step-down transformer

The LN4X Series is a LED exit sign that can be utilized indoors or outdoors and is able to resist high impact, corrosion and damp or wet locations. The series features an oil-resistant gasket for a water- and dust-tight seal, bright, even illumination in either red or green letters and LED lamps that provide more than 20 years of service. Its glass-filled polycarbonate construction is designed for wall mounting in harsh applications or industrial environments.

Nora Lighting’s Wet Location Emergency and Exit Lights feature three updated models that all include self diagnostic testing, manual test switch, 90 minute backup battery, brownout and short circuit protection. NE-970 has two 2.5W fully-adjustable LED emergency heads; Exit and Emergency Combination (NEX-720-LED) has dual 3.2W adjustable heads and exit sign; LED Exit Sign (NX-617-LED) are available in red or green letters with universal mounting plate. All fixtures have impact-resistant polycarbonate housings with flame retardant and wet locations ratings. NFPA 70 & NFPA 101 Life Safety Code listed.

The Philips Bodine UltimateOne combination AC/emergency LED drivers - BAC40EM10 and BAC40EM6 - are a combination of a 40W dimming LED driver with Philips SimpleSet technology and a 10W or 6W emergency LED driver in one low-profile case. The combination design guarantees compatibility between the AC and emergency drivers and helps simplify the installation process.

Made from durable injection molded ABS thermoplastic, flame-rated UV stable thermoplastic and die-cast aluminum, the EVC Series is a compact, architectural LED combination exit and emergency light with the highest reliability. The unit is easy to install in its commercial application and is equipped with an environmentally friendly, long life cycle Lithium Iron Phosphate battery and fully adjustable, dual-ratcheting high output LED lamp-heads.

The PG Series is an indoor/outdoor, die-cast architectural emergency unit. It is a wet location listed emergency luminaire with high-output LED technology that provides a path of egress illumination for mounting over entrance or exit ways and perimeter walkways. Standard Spectron® self-testing/self-diagnostic electronics are included, and a battery heater for cold temperature operation is available as an option. Features include 4 long-life, high-output LEDs, wide area illumination patterns and a Brownout detection circuit.

The LE Series, designed for recessed mounted architectural and commercial applications, consists of edge-lit, architectural LED exit signs featuring elegant styling in multiple finishes, easy installation and long-life LED lamps. Features of the LE Series include bright, even letter illumination in an energy-saving LED edge-lit exit sign configuration, choice of red or green lettering and AC or emergency operation with optional Spectron® self-test/self-diagnostic circuitry.

IOTA has expanded its popular emergency inverter line to include large IIS Central Inverter Systems capable of servicing emergency lighting requirements up to 50kVA. The new IIS Central Inverter Systems combine the benefits of inverter auxiliary systems with IOTA’s trusted performance and expertise in emergency lighting applications. IOTA Central Inverter systems offer several emergency solutions to meet the demands of varying lighting applications such as capacity requirements, load technology, voltage specifications, physical and environmental considerations, and desired performance

In the event of a power failure, the Assurance Emergency Lighting RHB Series fluorescent emergency ballast takes over from the AC ballast and operates 1 or 2 lamps at a reduced lumen output. Emergency ballasts must provide battery power for a minimum of 90 minutes, and must power the lamps to provide at least 1 Foot Candle of illumination on the floor. Emergency ballasts allow the same fixture to be used for both normal and emergency operation. All Commercial and Government buildings in the US are required by law to provide emergency lighting in the path of egress. Life Safety Code NFPA 101, UL924.

LIGHTPOWER™ Series micro inverter systems, designed for indoor commercial or industrial applications, provide sinusoidal emergency AC power to lighting fixtures equipped with incandescent, linear fluorescent, compact fluorescent or LED lamps between 20 and 55 watts. When normal utility supplied power is interrupted, the unit will automatically transfer to emergency mode in less than one second and begin supplying pure sinusoidal AC power to the load for 90 minutes. LPS features include offline operation for greater efficiency, Lead-Calcium or Nickel Cadmium batteries for low-cost maintenance and low voltage disconnect and AC lockout that protect batteries from discharge damage.

Myers EPS offers a full line of three phase emergency lighting inverters that provide up to 50kVA/kW of backup power for larger facilities and campuses. The series is compatible with any type of lighting load and it features a rock-solid design with 2x rating of all critical components. The series works with all lighting loads at cold starts for all normally off circuits or regular normally on circuits. All test and diagnostics are performed and recorded automatically, reducing maintenance costs.

Sizes: 4.8kVA, 6kVA, 8kVA, 10kVA, 12.5kVA, 16.7kVA, 24kVA, 33kVA, 40kVA & 50kVA

The EV Series, which provides bright and uniform illumination and increased spacing via two high power LEDs, is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has flame-rated, UV stable thermoplastic housing and a lightly textured white finish. The integral LED-based lamp-heads are fully adjustable with a position maintained by a friction fit design, and the unit provides a full 90 minutes of emergency lighting. Features include an environmentally friendly Nickel Metal Hydride battery and a micro-controlled pulse charger.

Myers EPS Illuminator Series E/IE-H and CIII-H are one of the latest innovations in emergency lighting inverter technology. The Illuminator-H series is the shaker table tested and approved expansion to the industry-leading central emergencylLighting inverters. These systems meet the requirements of CBC 2010 and IBC 2009 and have been shaker table tested in accordance with ICC-ES-AC-156 procedures to an SDS level of 2.5g. In addition, the series have received OSHPD (California Office of Statewide Health Planning and Development) Special Seismic Certification, which indicates that this product meets the most rigid seismic standards currently being specified.

Sizes: 175VA, 350VA, 550VA, 750VA, 1.5kVA, 2.25kVA, 3.0kVA, 3.75kVA, 5.0kVA, 6.0kVA, 8.0kVA, 10.0kVA, 12.5kVA & 16.7kVA

 IOTA ICE Series Emergency Battery Packs are designed for outdoor and cold-weather applications from minus 18 degrees to 55 degrees Celsius. ICE Series Battery Packs provide 1300 lumens of emergency illumination for both linear and compact fluorescent lamps, and feature an internal heating blanket that protects the battery pack from freezing conditions.

The Illuminator LVM Series of mini inverters is an easy solution for emergency power needs. Designed with Myers EPS’ advanced Pure Sine Wave technology, the mini inverters provide direct AC power and full illumination to all lighting sources including LED, fluorescent, HID quartz and screw-based LED lamps. With an ultra-wide .5 lead to .5 lag load power factor range, Myers EPS inverters offer unmatched compatibility, allowing existing fixtures to be used for both normal operation and emergency lighting without affecting the aesthetic design of the space. UL 924 Listed.

Capacity and Dimensions

Wall Mount: 110VA: 14.75" H x 16.25" W x 3.5" D

Wall Mount: 225VA: 23.25" H x 16.25" W x 3.5" D

Grid Mount: 110VA & 225 VA: 7.5" H x 23.875" W x 8" D

Aleddra’s UFO Emergency Battery Pack provides 25W/40W lumen output during emergency illumination for a minimum of 90 minutes. It is a cost-effective and energy-efficient option for various emergency lighting applications such as warehouses, manufacturing facilities, school gymnasiums, community centers, recreation centers, and department stores.

36 Watt Pure Sine Wave Micro Inverter, Monthly and Annual Self Testing Universal Input - Auto Adjust Output Voltage matches input voltage and frequency. Includes Power Share Technology. No ALCR Devices are needed when Si-36 is used with switched, 0-10 Vdc or line voltage dimming applications!

ConTech’s Adjustable Recessed or Surface Mount Edge-Lit exit Sign has a Nickel-Cadmium battery back-up to deliver more than 3 hours of emergency light. Our REXA can be installed as an end mount, wall or ceiling, recessed or surface with single or double face configuration. Even more options include green or red lettering, white or black housing. This fixture is your one stop shop for all you exit needs.