LIGHTING PRODUCTS

Functional Devices is proud to present our latest member to our Automatic Load Control Relay family, the ESRLBC. This newly designed model created with a new slim enclosure, allows for the sleek transition into linear lighting or anywhere fixture mount opportunities are available. This model offers the same robust quality our ESRN and ESRB, now including an isolated relay specific for the use with 0-10Vdc and DALI dimming options.

Myers EPS Illuminator IE is a central inverter system for emergency lighting. Breakthrough design features one cabinet construction for systems up to 16.7kVA/kW, reducing footprint and installation costs. With a wealth of advanced communications features, the Illuminator IE offers unmatched convenience. This series is designed for fluorescent, quartz, LED and incandescent normal on and/or normal off lighting loads and those applications that require normal off (emergency only) lighting loads. UL 924 Listed.

Sizes: 1.5KVA, 2.25KVA, 3.0KVA, 3.75KVA, 5.0KVA, 6.0KVA, 8.0KVA, 10.0KVA, 12.5KVA and 16.7KVA

The UFO-LED 25 Series is a battery pack inverter designed to work in tandem with an AC ballast to power LED luminaires in the event of interruptions or failures. Eliminating the need to install additional emergency lighting units, the UFO-LED will operate the LED luminaire at full lumen output continuously for 90 minutes during an input power interruption. The unit contains a solid-state charger with an automatic transfer circuit, a LED charge indicator light and a high temperature Nickel-Cadmium battery.

In the event of a power failure, the Assurance Emergency Lighting RHB Series fluorescent emergency ballast takes over from the AC ballast and operates 1 or 2 lamps at a reduced lumen output. Emergency ballasts must provide battery power for a minimum of 90 minutes, and must power the lamps to provide at least 1 Foot Candle of illumination on the floor. Emergency ballasts allow the same fixture to be used for both normal and emergency operation. All Commercial and Government buildings in the US are required by law to provide emergency lighting in the path of egress. Life Safety Code NFPA 101, UL924.

The Illuminator LVM Series of mini inverters is an easy solution for emergency power needs. Designed with Myers EPS’ advanced Pure Sine Wave technology, the mini inverters provide direct AC power and full illumination to all lighting sources including LED, fluorescent, HID quartz and screw-based LED lamps. With an ultra-wide .5 lead to .5 lag load power factor range, Myers EPS inverters offer unmatched compatibility, allowing existing fixtures to be used for both normal operation and emergency lighting without affecting the aesthetic design of the space. UL 924 Listed.

Capacity and Dimensions

Wall Mount: 110VA: 14.75" H x 16.25" W x 3.5" D

Wall Mount: 225VA: 23.25" H x 16.25" W x 3.5" D

Grid Mount: 110VA & 225 VA: 7.5" H x 23.875" W x 8" D

US LED’s dual head unit (EM-PC-UNVL-2-RC) is the perfect solution for projects requiring versatile emergency lighting. This emergency unit offers an ideal emergency operation with optimal spacing and light distribution.

US LED’s slim emergency exit combo sign (ESEM-PC-UNVL-2-RC) is the perfect solution for projects requiring emergency signage and lighting. In addition, the emergency exit light batteries can be paired with remote heads for optimal spacing and light distribution.

EarthTronics, dedicated to developing innovative energy efficient lighting products that provide a positive economic and environmental impact for its customers, introduces the new LED Direction Adjustable Wall Pack series to provide exterior, wide-flood area illumination for commercial, industrial and municipal facilities. Available in 20, 30 and 70 watts, in both 4000K and 5000K color of light, the new EarthTronics Direction Adjustable Wall Pack Series can be set and locked in to any angle ranging from 0° to 90° to provide exterior security lighting on such facilities as schools, hospitals, office buildings and other commercial or industrial structures. Each of the EarthTronics Adjustable Wall Packs accepts 100 – 277-volt AC power supply. The wall packs provide more than 100 watts per lumens and a high 80+ CRI for improved visual acuity and efficient performance. The 20-watt wall pack provides 2100 lumens, while the 30-watt and 70-watt walls produce 3000 lumens and 7700 lumens, respectively.

SHUFFLE SOS is specially configured to quickly and easily help people and emergency services in critical situations. SHUFFLE SOS provides an invaluable lifeline and welcoming sense of reassurance to spaces like university and business campuses, tourist areas, concert and sport venues, and military bases where safety is paramount. Options for SHUFFLE SOS include a 360-degree area light with strobe, light ring, 180-degree or quad-view camera, and horn and intercom.

The EV Series, which provides bright and uniform illumination and increased spacing via two high power LEDs, is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has flame-rated, UV stable thermoplastic housing and a lightly textured white finish. The integral LED-based lamp-heads are fully adjustable with a position maintained by a friction fit design, and the unit provides a full 90 minutes of emergency lighting. Features include an environmentally friendly Nickel Metal Hydride battery and a micro-controlled pulse charger.

The Myers EPS Illuminator Series DR is a three-phase emergency lighting inverter designed for outdoor use. The inverter transfers to emergency mode within two milliseconds when utility power is lost, enabling the system to support all types of lighting loads, including LED and HID. With an outdoor-rated cabinet the Illuminator DR can be installed in remote locations and in situations where no indoor space is available. Based upon more than 30 years of engineering and manufacturing expertise, this product combines all of the features that deliver reliability, versatility, and ease of operation and maintenance with the latest technology to create an industry-leading solution.

Sizes: 4.0kVA, 5.0kVA, 8.0kVA and 10kVA

The LN4X Series is a LED exit sign that can be utilized indoors or outdoors and is able to resist high impact, corrosion and damp or wet locations. The series features an oil-resistant gasket for a water- and dust-tight seal, bright, even illumination in either red or green letters and LED lamps that provide more than 20 years of service. Its glass-filled polycarbonate construction is designed for wall mounting in harsh applications or industrial environments.

Myers EPS offers a full line of three phase emergency lighting inverters that provide up to 50kVA/kW of backup power for larger facilities and campuses. The series is compatible with any type of lighting load and it features a rock-solid design with 2x rating of all critical components. The series works with all lighting loads at cold starts for all normally off circuits or regular normally on circuits. All test and diagnostics are performed and recorded automatically, reducing maintenance costs.

Sizes: 4.8kVA, 6kVA, 8kVA, 10kVA, 12.5kVA, 16.7kVA, 24kVA, 33kVA, 40kVA & 50kVA

US LED’s emergency exit sign (ESX1) is the perfect solution for projects requiring code-compliant emergency signage. This emergency exit sign features a rechargeable battery backup for an emergency operation and a switch for compliance testing

Made from durable injection molded ABS thermoplastic, flame-rated UV stable thermoplastic and die-cast aluminum, the EVC Series is a compact, architectural LED combination exit and emergency light with the highest reliability. The unit is easy to install in its commercial application and is equipped with an environmentally friendly, long life cycle Lithium Iron Phosphate battery and fully adjustable, dual-ratcheting high output LED lamp-heads.

LOBO Series from Exitronix combines a low-profile, wall mount, thermoplastic exit sign with an integral LED emergency unit designed for both traditional mounting above a doorway and low-level applications. The LOBO Series combination exit/emergency unit is designed for fast and easy installation and is available with either a red or green stencil face legend in a white enclosure. The LOBO Series is ideal for offices, classrooms, corridors, lobbies, and other indoor commercial spaces requiring a minimalist aesthetic for emergency lighting combined with a low-profile exit sign.

ConTech’s Adjustable Recessed or Surface Mount Edge-Lit exit Sign has a Nickel-Cadmium battery back-up to deliver more than 3 hours of emergency light. Our REXA can be installed as an end mount, wall or ceiling, recessed or surface with single or double face configuration. Even more options include green or red lettering, white or black housing. This fixture is your one stop shop for all you exit needs.

The ILB Series Emergency Battery Packs from IOTA Engineering offer 90-minute emergency operation for LED fixtures in the event of a loss of power. The ILB Series includes models for operating LED loads up to 5, 7 and 12 watts at input voltages up to 12 and 24 volts. IOTA ILB Battery Packs are UL Recognized components and include test switch and charge indicator accessories, a long-life recyclable Ni-Cad battery, and a 5-Year Warranty.

The Assurance Emergency Lighting Si Series emergency lighting inverters operate LED and fluorescent fixtures with pure sinusoidal power during loss of normal AC power. The Si Series inverters support emergency lighting for 90 minutes in accordance with life safety code requirements. All Si Inverters can be derated for 2 hour run time.

IOTA IIS Series Inverters provide emergency power solutions for fluorescent, incandescent, LED, and HID lighting loads. IIS Inverters operate multiple fixtures at full light output from a central battery supply for the 90 minutes required by code. IIS Inverters are perfect and cost-effective solutions for smaller spaces such as office, retail and restaurant applications where typical inverters solutions can be too expensive. Models include 125W to 375W output, and feature ceiling grid, surface mount, or recessed wall mounting configurations.