LIGHTING PRODUCTS

ELC is a compact device that converts any LED luminaire from normal to emergency operation when normal power fails. Includes a dedicated driver to operate the luminaire in emergencies even if the normal driver fails and works with any lighting control system. ELC contains no battery and is powered from the Signtex central battery system at 24VDC. Lumen output is calculated precisely for emergency light levels required by codes. Models are available to operate a wide range of LED fixtures including troffers, architectural, down lights, linear lighting and hi bays with a power range from 5W to more than 400W. UL Listed for field or factory installation.

The Exitronix LBDX Series LED Backup Driver is specifically designed to provide emergency lighting of LED fixtures with the loss of power. The unit’s low-profile configuration makes the series suitable for most pre-installation and on-site applications requiring emergency illumination.

The Exitronix S900C Series combines the architectural design of an edge-lit exit sign with ultra-low profile, fully adjustable recessed emergency LED lamp heads for a modern, low-profile aesthetic. The S900C Series is designed for easy recessed or surface mount installation in ceilings or walls. Single- and double-face LED exit configurations are included with brushed aluminum, black or white housing finish options. The S900C Series is ideal for offices, classrooms, corridors, lobbies, and other indoor commercial spaces requiring a minimalist aesthetic for emergency lighting combined with an architectural exit sign.

The Lithonia Ligthing® EU2L LED Emergency Light is suitable for emergency lighting applications such as stairways and hallways. Designed with all-inclusive lamp, reflector and lens assembly. Its low profile and dual lamp heads make the EU2L ideal for safely illuminating the path of egress in small spaces at lower mounting heights. It can be wall or ceiling mounted and will provide 90 minutes of emergency power in the case of power loss.

Part of the Equity Line of value-driven products, the Exitronix QXEDGP edge-lit exit sign features elegant styling in an economical LED thermoplastic design. It features simple installation with field-selectable chevrons that have a factory-installed guide template for multiple directional configurations. A snap-in canopy is included for simple top, end or surface mount installations. Single-face signs include an ultra-clear acrylic panel while double-face signs utilize a factory-installed mirror-finish mylar insert between two clear acrylic panels. The QXEDGP is UL 924 Listed for Damp Locations, is California Energy Commission (CEC) Title 20 Compliant, meets NFPA 101 Life Safety Code, NEC and OSHA.

 IOTA ICE Series Emergency Battery Packs are designed for outdoor and cold-weather applications from minus 18 degrees to 55 degrees Celsius. ICE Series Battery Packs provide 1300 lumens of emergency illumination for both linear and compact fluorescent lamps, and feature an internal heating blanket that protects the battery pack from freezing conditions.

Aleddra introduces Emergency Battery Pack (EMA Series) for LED lamps and indoor fixtures. It provides 15W/25W/40W emergency power for a minimum of 90 minutes emergency operation. During power outage, the emergency battery pack automatically draws power from its built-in battery and lasts more than 90 minutes on battery. With its price point, this Emergency Battery Pack is the most cost-effective emergency lighting option for office, classroom, hotel lobby, hallway and more. It features a simple external installation.

IOTA has expanded its popular emergency inverter line to include large IIS Central Inverter Systems capable of servicing emergency lighting requirements up to 50kVA. The new IIS Central Inverter Systems combine the benefits of inverter auxiliary systems with IOTA’s trusted performance and expertise in emergency lighting applications. IOTA Central Inverter systems offer several emergency solutions to meet the demands of varying lighting applications such as capacity requirements, load technology, voltage specifications, physical and environmental considerations, and desired performance

The PG Series is an indoor/outdoor, die-cast architectural emergency unit. It is a wet location listed emergency luminaire with high-output LED technology that provides a path of egress illumination for mounting over entrance or exit ways and perimeter walkways. Standard Spectron® self-testing/self-diagnostic electronics are included, and a battery heater for cold temperature operation is available as an option. Features include 4 long-life, high-output LEDs, wide area illumination patterns and a Brownout detection circuit.

The Dynamo, or DYN, Series is an industrial LED-based emergency light for wall or ceiling mount application. When primary power is lost, the unit’s highly versatile, superior lumen output will provide a minimum of 90 minutes of illumination. Its polycarbonate covers and shield, thermoplastic housing and die-cast aluminum lamp-heads were specifically designed to make the Dynamo series able to withstand and illuminate demanding environments such as chemical plants, wet locations and food processing or food storage facilities.

The Exitronix MESA Series is a single phase, standby, solid-state inverter designed to provide “soft-start” power to designated emergency lighting fixtures. MESA consists of a self-contained inverter section with a fully automatic, thermal-compensating, variable-rate battery charger. The MESA is designed to function in conjunction with the existing building electrical system to provide Pulse Width Modulated, sinusoidal, high-quality power conditioning, backup power protection and distribution for lighting loads and other critical loads. Upon failure of the normal utility power, the MESA automatically transfers to inverter mode and provides a minimum of 90 minutes of emergency power to the connected load.

IOTA IIS Series Inverters provide emergency power solutions for fluorescent, incandescent, LED, and HID lighting loads. IIS Inverters operate multiple fixtures at full light output from a central battery supply for the 90 minutes required by code. IIS Inverters are perfect and cost-effective solutions for smaller spaces such as office, retail and restaurant applications where typical inverters solutions can be too expensive. Models include 125W to 375W output, and feature ceiling grid, surface mount, or recessed wall mounting configurations.

LOBO Series from Exitronix combines a low-profile, wall mount, thermoplastic exit sign with an integral LED emergency unit designed for both traditional mounting above a doorway and low-level applications. The LOBO Series combination exit/emergency unit is designed for fast and easy installation and is available with either a red or green stencil face legend in a white enclosure. The LOBO Series is ideal for offices, classrooms, corridors, lobbies, and other indoor commercial spaces requiring a minimalist aesthetic for emergency lighting combined with a low-profile exit sign.

The EVO Series is an outdoor, single- or double-head, LED-based remote that accepts DC input from an EV emergency light with remote capacity (EV4 model). The EVO is best utilized as an over-the-door path of egress light for emergency operation. The EVO uses a single three watt rated LED per lamp-head and can be located up to 50 feet from the external power source. It is available in white or black corrosion-resistant finish.

The Philips Bodine UltimateOne combination AC/emergency LED drivers - BAC40EM10 and BAC40EM6 - are a combination of a 40W dimming LED driver with Philips SimpleSet technology and a 10W or 6W emergency LED driver in one low-profile case. The combination design guarantees compatibility between the AC and emergency drivers and helps simplify the installation process.

The Philips Bodine 4W BSL4L emergency LED driver provides a price-sensitive, high-quality emergency lighting solution for space-limited linear LED fixtures. It supplies up to 520 lumens in emergency mode (based on 130 lumens/watt of load power) for 90 minutes and includes proprietary charging technology designed for low energy consumption and poke-in wiring connections to help simplify installation. In addition, it meets Title 20 CEC efficiency standards and is UL Listed for the U.S. and Canada.

US LED’s slim emergency exit combo sign (ESEM-PC-UNVL-2-RC) is the perfect solution for projects requiring emergency signage and lighting. In addition, the emergency exit light batteries can be paired with remote heads for optimal spacing and light distribution.

The EVHC series is a high lumen output emergency lighting unit designed for high mounting height applications. It is available with either a standard 346 lumen lamp, which offers offers 44 feet of spacing on a 16 foot mounting height, or a high lumen option of 546 lumens per head, which offers 67 feet of spacing. Features include fully adjustable high-output LED lamps and an environmentally friendly Lithium Iron Phosphate battery. The EVHC Series is flame rated and can resist high impact.

The Assurance Emergency Lighting L Series emergency LED Drivers are the best choice for applications using LED boards or arrays operated by an external Class 2 AC driver. Our Constant Power Emergency LED drivers can be installed inside, on top of, or remotely from a fixture to operate a single fixture during an emergency operation. When normal AC power fails, the Assurance emergency LED drivers switch into emergency mode and support LED fixtures for 90 minutes. When AC power is restored, the emergency drivers automatically return to the charging mode. Numerous L Series emergency LED drivers are available for different applications and mounting heights to meet life safety codes.

Functional Devices is proud to offer a panel mount relay for lighting control, which includes a mechanical latching output with 24Vac/dc momentary pulse control. We provide a 20 Amp standard ballast, with a 16 Amp electronic ballast rating for both on/off capabilities. Our relay options give you the flexibility for either a 2-wire status report (FDL20ALRMU) or by an auxiliary contact output (FDL20ALRM2U) for low voltage status feedback. The FDL20ALRMU is unique, our status reporting comes from the contact output side of the relay and not that of the control side, giving you actual feedback, the load is active. Both models include an override manual switch for status control at the panel if required.