LIGHTING PRODUCTS

The PGR Series offers LED performance in a remote fixture, architectural style for indoor or outdoor application and illumination by four high power LEDs. In the event of 1 or 2 LED failures, the unit will continue to operate. The PGR accepts DC voltage, which must be supplied from an external 6-12V DC emergency lighting unit. The remote can be wall mounted by use of a universal molded-in template.

In the event of a power failure, the Assurance Emergency Lighting RHB Series fluorescent emergency ballast takes over from the AC ballast and operates 1 or 2 lamps at a reduced lumen output. Emergency ballasts must provide battery power for a minimum of 90 minutes, and must power the lamps to provide at least 1 Foot Candle of illumination on the floor. Emergency ballasts allow the same fixture to be used for both normal and emergency operation. All Commercial and Government buildings in the US are required by law to provide emergency lighting in the path of egress. Life Safety Code NFPA 101, UL924.

36 Watt Pure Sine Wave Micro Inverter, Monthly and Annual Self Testing Universal Input - Auto Adjust Output Voltage matches input voltage and frequency. Includes Power Share Technology. No ALCR Devices are needed when Si-36 is used with switched, 0-10 Vdc or line voltage dimming applications!

 IOTA ICE Series Emergency Battery Packs are designed for outdoor and cold-weather applications from minus 18 degrees to 55 degrees Celsius. ICE Series Battery Packs provide 1300 lumens of emergency illumination for both linear and compact fluorescent lamps, and feature an internal heating blanket that protects the battery pack from freezing conditions.

The LiteGear Series, constructed of heavy-duty, 18 gauge steel with a white powder-coat paint finish, is designed for indoor commercial or industrial applications. When normal utility supplied power is interrupted, the LiteGear Series unit will automatically transfer to emergency mode in less than 2 seconds and begin supplying inverted battery-derived AC power to the load for 90 minutes. The unit is capable of operating normally on, normally off or switched loads. LiteGear features include a maximum capacity of 100-250 VA/Watts and surface wall, recessed ceiling or recessed wall mounting.

The Assurance Emergency Lighting Si Series emergency lighting inverters operate LED and fluorescent fixtures with pure sinusoidal power during loss of normal AC power. The Si Series inverters support emergency lighting for 90 minutes in accordance with life safety code requirements. All Si Inverters can be derated for 2 hour run time.

Part of the Equity Line of value-driven products, the Exitronix QXEDGP edge-lit exit sign features elegant styling in an economical LED thermoplastic design. It features simple installation with field-selectable chevrons that have a factory-installed guide template for multiple directional configurations. A snap-in canopy is included for simple top, end or surface mount installations. Single-face signs include an ultra-clear acrylic panel while double-face signs utilize a factory-installed mirror-finish mylar insert between two clear acrylic panels. The QXEDGP is UL 924 Listed for Damp Locations, is California Energy Commission (CEC) Title 20 Compliant, meets NFPA 101 Life Safety Code, NEC and OSHA.

Myers EPS Illuminator IE is a central inverter system for emergency lighting. Breakthrough design features one cabinet construction for systems up to 16.7kVA/kW, reducing footprint and installation costs. With a wealth of advanced communications features, the Illuminator IE offers unmatched convenience. This series is designed for fluorescent, quartz, LED and incandescent normal on and/or normal off lighting loads and those applications that require normal off (emergency only) lighting loads. UL 924 Listed.

Sizes: 1.5KVA, 2.25KVA, 3.0KVA, 3.75KVA, 5.0KVA, 6.0KVA, 8.0KVA, 10.0KVA, 12.5KVA and 16.7KVA

ConTech’s Adjustable Recessed or Surface Mount Edge-Lit exit Sign has a Nickel-Cadmium battery back-up to deliver more than 3 hours of emergency light. Our REXA can be installed as an end mount, wall or ceiling, recessed or surface with single or double face configuration. Even more options include green or red lettering, white or black housing. This fixture is your one stop shop for all you exit needs.

The Exitronix S900C Series combines the architectural design of an edge-lit exit sign with ultra-low profile, fully adjustable recessed emergency LED lamp heads for a modern, low-profile aesthetic. The S900C Series is designed for easy recessed or surface mount installation in ceilings or walls. Single- and double-face LED exit configurations are included with brushed aluminum, black or white housing finish options. The S900C Series is ideal for offices, classrooms, corridors, lobbies, and other indoor commercial spaces requiring a minimalist aesthetic for emergency lighting combined with an architectural exit sign.

Myers EPS Illuminator Series E/IE-H and CIII-H are one of the latest innovations in emergency lighting inverter technology. The Illuminator-H series is the shaker table tested and approved expansion to the industry-leading central emergencylLighting inverters. These systems meet the requirements of CBC 2010 and IBC 2009 and have been shaker table tested in accordance with ICC-ES-AC-156 procedures to an SDS level of 2.5g. In addition, the series have received OSHPD (California Office of Statewide Health Planning and Development) Special Seismic Certification, which indicates that this product meets the most rigid seismic standards currently being specified.

Sizes: 175VA, 350VA, 550VA, 750VA, 1.5kVA, 2.25kVA, 3.0kVA, 3.75kVA, 5.0kVA, 6.0kVA, 8.0kVA, 10.0kVA, 12.5kVA & 16.7kVA

The Exitronix NXF Series is a family of NEMA 4X and UL-EPH classified emergency lighting solutions for extreme commercial and heavy industrial environments. The NXF family offers protection against humidity, dust, and water infiltration and is comprised of the NXFX (Exit Sign), NXFC (Exit Combo), NXFE (Emergency Lighting Unit), and NXFR (Remote Head). The reinforced polycarbonate enclosure with impact-resistant, UV-stable polycarbonate lens is suitable for vandal-prone areas and Wet Locations.

The Myers EPS Illuminator Series SR is a single-phase emergency lighting inverter rated for outdoor use. The inverter transfers to emergency mode within two milliseconds when utility power is lost, enabling the system to support all types of lighting loads, including LED and HID. Available in two sizes, the Illuminator SR is can mounted to a pole or on the ground.

Capacity and Dimensions

875VA: 46.1" H x 16" W x 9.3" D

1750VA: 50.75" H x 19" W x 14.375" D 

The Philips Bodine UltimateOne combination AC/emergency LED drivers - BAC40EM10 and BAC40EM6 - are a combination of a 40W dimming LED driver with Philips SimpleSet technology and a 10W or 6W emergency LED driver in one low-profile case. The combination design guarantees compatibility between the AC and emergency drivers and helps simplify the installation process.

The PGF1 Series is a maintenance-free indoor or outdoor architectural LED sconce. It is wet location listed and dark sky compliant. The sconce offers pathway, perimeter or entry lighting at a mounting height of 8 to 10 feet. It is made of die-cast aluminum, and the acrylic lens has a 95% light transmission to reduce glare.

The new Philips Bodine B50CT emergency ballast is designed to work with linear fluorescent and Type A TLED applications. The B50CT operates one lamp in emergency mode and, depending on the wattage and lamp selected, provides up to 1400 lumens initial emergency light output. It is compatible with 13-55W fluorescent lamps and with 7-16.5W Type A TLED lamps, including the Philips LED T8 InstantFit. Please see the product specification sheet or contact the factory for specific compatibility information and other important product details. The B50CT is UL Listed for the U.S. and Canada and meets CEC Title 20 efficiency standards. It does not replace the Philips Bodine B50 fluorescent emergency ballast.

The LE Series, designed for recessed mounted architectural and commercial applications, consists of edge-lit, architectural LED exit signs featuring elegant styling in multiple finishes, easy installation and long-life LED lamps. Features of the LE Series include bright, even letter illumination in an energy-saving LED edge-lit exit sign configuration, choice of red or green lettering and AC or emergency operation with optional Spectron® self-test/self-diagnostic circuitry.

The Myers EPS Illuminator Series DR is a three-phase emergency lighting inverter designed for outdoor use. The inverter transfers to emergency mode within two milliseconds when utility power is lost, enabling the system to support all types of lighting loads, including LED and HID. With an outdoor-rated cabinet the Illuminator DR can be installed in remote locations and in situations where no indoor space is available. Based upon more than 30 years of engineering and manufacturing expertise, this product combines all of the features that deliver reliability, versatility, and ease of operation and maintenance with the latest technology to create an industry-leading solution.

Sizes: 4.0kVA, 5.0kVA, 8.0kVA and 10kVA

Aleddra’s UFO Emergency Battery Pack provides 25W/40W lumen output during emergency illumination for a minimum of 90 minutes. It is a cost-effective and energy-efficient option for various emergency lighting applications such as warehouses, manufacturing facilities, school gymnasiums, community centers, recreation centers, and department stores.

Myers EPS Illuminator E is a fast transfer central inverter system for emergency lighting. Breakthrough design features one cabinet construction for systems up to 16.7kVA/kW, reducing footprint and installation costs. With a wealth of advanced communications features, the Illuminator E offers unmatched convenience. This series is designed for HIS lighting loads, mixed HID, incandescent, quarts, LED, fluorescent normal on loads and applications that don’t require large normally off (emergency only) loads. UL 924 Listed.

Sizes: 1.5KVA, 2.25KVA, 3.0KVA, 3.75KVA, 5.0KVA, 6.0KVA, 8.0KVA, 10.0KVA, 12.5KVA and 16.7KVA