LIGHTING PRODUCTS

Series CBM emergency lighting system from Signtex Lighting comes with automatic email reporting of mandated diagnostic tests as standard equipment, providing automatic compliance with Life safety Codes.This advanced patented system uses low voltage DC distribution and solves the problem of battery maintenance by providing instant notification of any fault to up to six email addresses and allowing battery changeout in minutes by in-house maintenance personnel, without special tools, ladders or factory training. Replacement SLA batteries are standard models available from any local commercial distributor. Initial cost is competitive with alternates, and operating life cycle costs are lower than any other emergency lighting system.

EarthTronics, dedicated to developing innovative energy efficient lighting products that provide a positive economic and environmental impact for its customers, introduces the new LED Direction Adjustable Wall Pack series to provide exterior, wide-flood area illumination for commercial, industrial and municipal facilities. Available in 20, 30 and 70 watts, in both 4000K and 5000K color of light, the new EarthTronics Direction Adjustable Wall Pack Series can be set and locked in to any angle ranging from 0° to 90° to provide exterior security lighting on such facilities as schools, hospitals, office buildings and other commercial or industrial structures. Each of the EarthTronics Adjustable Wall Packs accepts 100 – 277-volt AC power supply. The wall packs provide more than 100 watts per lumens and a high 80+ CRI for improved visual acuity and efficient performance. The 20-watt wall pack provides 2100 lumens, while the 30-watt and 70-watt walls produce 3000 lumens and 7700 lumens, respectively.

The safety-focused LED Emergency Light is the first of it’s kind designed specifically for high bay applications. In times of power loss, it delivers 90 minutes and 4,000 lumens of illumination and visibility, helping occupants navigate their way to safety. It’s unique, patent-pending design enables compatibility across a range of input voltages, from 120V to 480V without the use of a step-down transformer

36 Watt Pure Sine Wave Micro Inverter, Monthly and Annual Self Testing Universal Input - Auto Adjust Output Voltage matches input voltage and frequency. Includes Power Share Technology. No ALCR Devices are needed when Si-36 is used with switched, 0-10 Vdc or line voltage dimming applications!

The RSL Series from Exitronix is available with either 5 watt or 7 watt PAR18 LED lamps providing up to 101 feet of on-center spacing. It can be ordered in both 6 volt or 12 volt configurations with capacities up to 90 watts for extended run time or remote capacity. The RSL is offered with maintenance-free, lead calcium or NiCad batteries, and has available self-test/self-diagnostics and time delay options. The unit is constructed of durable, die-formed 20-gauge steel with either black or white powder-coated finishes.

Myers EPS Illuminator Series E/IE-H and CIII-H are one of the latest innovations in emergency lighting inverter technology. The Illuminator-H series is the shaker table tested and approved expansion to the industry-leading central emergencylLighting inverters. These systems meet the requirements of CBC 2010 and IBC 2009 and have been shaker table tested in accordance with ICC-ES-AC-156 procedures to an SDS level of 2.5g. In addition, the series have received OSHPD (California Office of Statewide Health Planning and Development) Special Seismic Certification, which indicates that this product meets the most rigid seismic standards currently being specified.

Sizes: 175VA, 350VA, 550VA, 750VA, 1.5kVA, 2.25kVA, 3.0kVA, 3.75kVA, 5.0kVA, 6.0kVA, 8.0kVA, 10.0kVA, 12.5kVA & 16.7kVA

ConTech’s Adjustable Recessed or Surface Mount Edge-Lit exit Sign has a Nickel-Cadmium battery back-up to deliver more than 3 hours of emergency light. Our REXA can be installed as an end mount, wall or ceiling, recessed or surface with single or double face configuration. Even more options include green or red lettering, white or black housing. This fixture is your one stop shop for all you exit needs.

In the event of a power failure, the Assurance Emergency Lighting RHB Series fluorescent emergency ballast takes over from the AC ballast and operates 1 or 2 lamps at a reduced lumen output. Emergency ballasts must provide battery power for a minimum of 90 minutes, and must power the lamps to provide at least 1 Foot Candle of illumination on the floor. Emergency ballasts allow the same fixture to be used for both normal and emergency operation. All Commercial and Government buildings in the US are required by law to provide emergency lighting in the path of egress. Life Safety Code NFPA 101, UL924.

The ILB Series Emergency Battery Packs from IOTA Engineering offer 90-minute emergency operation for LED fixtures in the event of a loss of power. The ILB Series includes models for operating LED loads up to 5, 7 and 12 watts at input voltages up to 12 and 24 volts. IOTA ILB Battery Packs are UL Recognized components and include test switch and charge indicator accessories, a long-life recyclable Ni-Cad battery, and a 5-Year Warranty.

Nora Lighting’s Wet Location Emergency and Exit Lights feature three updated models that all include self diagnostic testing, manual test switch, 90 minute backup battery, brownout and short circuit protection. NE-970 has two 2.5W fully-adjustable LED emergency heads; Exit and Emergency Combination (NEX-720-LED) has dual 3.2W adjustable heads and exit sign; LED Exit Sign (NX-617-LED) are available in red or green letters with universal mounting plate. All fixtures have impact-resistant polycarbonate housings with flame retardant and wet locations ratings. NFPA 70 & NFPA 101 Life Safety Code listed.

The EVHC series is a high lumen output emergency lighting unit designed for high mounting height applications. It is available with either a standard 346 lumen lamp, which offers offers 44 feet of spacing on a 16 foot mounting height, or a high lumen option of 546 lumens per head, which offers 67 feet of spacing. Features include fully adjustable high-output LED lamps and an environmentally friendly Lithium Iron Phosphate battery. The EVHC Series is flame rated and can resist high impact.

Myers EPS Illuminator IE is a central inverter system for emergency lighting. Breakthrough design features one cabinet construction for systems up to 16.7kVA/kW, reducing footprint and installation costs. With a wealth of advanced communications features, the Illuminator IE offers unmatched convenience. This series is designed for fluorescent, quartz, LED and incandescent normal on and/or normal off lighting loads and those applications that require normal off (emergency only) lighting loads. UL 924 Listed.

Sizes: 1.5KVA, 2.25KVA, 3.0KVA, 3.75KVA, 5.0KVA, 6.0KVA, 8.0KVA, 10.0KVA, 12.5KVA and 16.7KVA

ELC is a compact device that converts any LED luminaire from normal to emergency operation when normal power fails. Includes a dedicated driver to operate the luminaire in emergencies even if the normal driver fails and works with any lighting control system. ELC contains no battery and is powered from the Signtex central battery system at 24VDC. Lumen output is calculated precisely for emergency light levels required by codes. Models are available to operate a wide range of LED fixtures including troffers, architectural, down lights, linear lighting and hi bays with a power range from 5W to more than 400W. UL Listed for field or factory installation.

Myers EPS Illuminator Series CR is an emergency lighting inverter available in single phase for installation outdoors. The inverter transfers to emergency mode within two milliseconds when utility power is lost, which allows the system to support all types of lighting loads including LED and HID. The outdoor-rated cabinet facilitates installation in remote locations and where space in not available indoors. Based upon more than 30 years of engineering and manufacturing expertise, the CR Series combines all of the features that deliver reliability, versatility and ease of operation and maintenance with the latest technology to create an industry-leading solution.

Sizes: 3.0kVA, 4.0kVA, 5.0kVA, 6.5kVA and 8.0kVA

The Myers EPS Illuminator Series DR is a three-phase emergency lighting inverter designed for outdoor use. The inverter transfers to emergency mode within two milliseconds when utility power is lost, enabling the system to support all types of lighting loads, including LED and HID. With an outdoor-rated cabinet the Illuminator DR can be installed in remote locations and in situations where no indoor space is available. Based upon more than 30 years of engineering and manufacturing expertise, this product combines all of the features that deliver reliability, versatility, and ease of operation and maintenance with the latest technology to create an industry-leading solution.

Sizes: 4.0kVA, 5.0kVA, 8.0kVA and 10kVA

The CZQRW is designed to match the appearance of the Cortez™ series units for use as part of an emergency lighting system providing light for the path of egress in wet location applications. With fully adjustable optics these remotes provide high-quality light output when it is needed most. Universal DC Voltage Input (8-30 VDC). Two lumen output options available in single and twin configurations. Self-diagnostics compatibility standard. Premium aesthetic for commercial spaces available in 4 color options (black, white, dark bronze, and aluminum).

Functional Devices is proud to present our latest member to our Automatic Load Control Relay family, the ESRLBC. This newly designed model created with a new slim enclosure, allows for the sleek transition into linear lighting or anywhere fixture mount opportunities are available. This model offers the same robust quality our ESRN and ESRB, now including an isolated relay specific for the use with 0-10Vdc and DALI dimming options.

The Myers EPS Illuminator Series SR is a single-phase emergency lighting inverter rated for outdoor use. The inverter transfers to emergency mode within two milliseconds when utility power is lost, enabling the system to support all types of lighting loads, including LED and HID. Available in two sizes, the Illuminator SR is can mounted to a pole or on the ground.

Capacity and Dimensions

875VA: 46.1" H x 16" W x 9.3" D

1750VA: 50.75" H x 19" W x 14.375" D 

The LSN D Series is a single-phase central lighting inverter that provides a centralized solution to emergency lighting and power back-up with a wide array of options designed to minimize maintenance requirements and optimize emergency lighting performance. When normal utility-supplied power is present, the LSN model central lighting inverter provides load-side line conditioning with "brownout" protection and charges the system batteries when required. As a series that is both user-friendly and security-enabled, the LSN provides features such as a password-protected user interface, email capability, cabinet locks and a monitoring program.

The EVO Series is an outdoor, single- or double-head, LED-based remote that accepts DC input from an EV emergency light with remote capacity (EV4 model). The EVO is best utilized as an over-the-door path of egress light for emergency operation. The EVO uses a single three watt rated LED per lamp-head and can be located up to 50 feet from the external power source. It is available in white or black corrosion-resistant finish.