LIGHTING PRODUCTS

The LightFlex™ LED Family from Sunoptics® is the industry’s first tubular daylighting system with integrated tunable-white LEDs and controls to provide natural daylight, tunable-white LED light or a combination of both — in the same system. Leveraging Acuity Brands’ Mainstream Dynamic™ platform with nLight® controls, LightFlex LED provides an optimal lighting system for interior commercial applications to support ones’ natural circadian rhythm. This is achieved by providing access to natural light throughout the day - while maintaining light levels for the task.

The Sunoptics SignatureTM Series is our highest performing skylight. Through its patented design featuring prismatic optics, SignatureTM Series skylights capture more light at low-light levels than any other passive skylight on the market today. They provide glare-free, UV-damage free, full-spectrum natural light. SignatureTM Series skylights are for use in open ceiling applications such as retail, warehouses, manufacturing, and areas with higher mounting heights. Optimize your energy savings by pairing the SignatureTM Series skylights with Acuity LED lighting and lighting controls to reduce your energy costs on lighting by 80-90%.

The DPN Series photocontrols were specifically designed to turn the light off halfway through the night to save energy and extend fixture life.

The SBO BTP series of fixture mount occupancy sensors are rated for outdoor use with dimming photocells, making it ideal for indoor standalone industrial lighting control applications requiring an IP66 wet location rating. With its clean design and reliable performance, the SBO BTP sensor offers 100% digital passive infrared (PIR) technology that’s tuned for walking size motion, helping to achieve code compliance without compromising the aesthetic of the light fixture or the space created. The versatile SBO BTP sensor is optimized to perform at a variety of mounting heights typical of industrial applications.

The Fresco RB combines aesthetics and performance in a digital wall station. The easy-to-install Fresco RB offers independently programmable buttons and custom engraving in 2-, 3-, 4-, 7- or 8-button configurations; and when connected over the Fresco network, users enjoy the ease and flexibility to control lighting and other devices. Pair it with a Fresco Touchscreen to perform functions like selecting lighting scenes, managing light levels and adjusting shades directly from the station.

wiSTAR™ is a wireless, self-powered lighting control system designed for stand-alone, indoor applications such as offices, conference rooms, break rooms, classrooms and much more. From retrofitting older structures to designing new buildings, wiSTAR is a simple way to ensure flexibility, energy savings, and cost reductions to almost any space.

The DTL DSN solution combines the reliability of the DLL Elite photocontrol, designed for 20-year operating life, with the performance of the Itron network platform for unparalleled functionality and adaptive control of street lighting systems. With the DSN solution, you now have access to a multi-application platform, providing one network for critical infrastructure solutions like smart lighting, smart metering and other outdoor IoT technologies.

Each ROAM wireless outdoor lighting management system gateway receives data and transmits commands to ROAM nodes, with each one communicating with up to 2,000 devices. ROAM gateways are mounted on poles or attached to buildings, and uplink via Ethernet communication, or, in the case of ROAM, also by cellular link.

Input interface LMIN-104 allows third-party devices to connect to the Wattstopper Digital Lighting Management (DLM) lighting control system. It includes four 24VDC input terminals and can be programmed to accept maintained or momentary switch closure inputs. Input signals can come from a wide variety of devices, including building automation systems, time clocks, and key switches for partition control, load shedding, and after hour cleaning of spaces. Additionally, the LMIN-104 can accept inputs from two existing DLM analog photocells.

Functional Devices is proud to offer a panel mount relay for lighting control, which includes a mechanical latching output with 24Vac/dc momentary pulse control. We provide a 20 Amp standard ballast, with a 16 Amp electronic ballast rating for both on/off capabilities. Our relay options give you the flexibility for either a 2-wire status report (FDL20ALRMU) or by an auxiliary contact output (FDL20ALRM2U) for low voltage status feedback. The FDL20ALRMU is unique, our status reporting comes from the contact output side of the relay and not that of the control side, giving you actual feedback, the load is active. Both models include an override manual switch for status control at the panel if required.

The nLight® AIR wireless controls adapter is a device that connects your nLight AIR control system to the nLight ECLYPSE®. So for the first time, you can unlock the power of time-based controls and demand response, tap into the capabilities of ENVYSION™ and SensorView software, and enable a hybrid nLight wired and wireless control system with a single pane of glass. As part of the nLight AIR wireless controls family, the nLight AIR adapter uses a 900MHz communication frequency that easily penetrates obstructions and its five-tier security architecture helps building owners and occupants rest easy.

The nLight nIO D / nIO 1S is a low voltage device that interfaces and provides network addressability for a variety of non-nLight devices. The nIO D is an output device that controls the dimming level of 0-10 VDC dimming ballasts / LED drivers. The nIO 1S is an input device that detects a toggle or momentary dry contact closure switch. Additionally, the nIO 1S can read a 0-10 VDC dimming control signal from non-nLight dimming photocells and wall dimmers.

Designed for small venues, Vignette is a stand-alone wall station ideal for controlling DMX512, white and color lighting. Snap together between one to six stations to make the controller that’s ideal for the space. This button and slider controller creates a network of customizable stations used for scene playback with functions such as press-and-hold to record, zone control, console lockout and more!

The nLight® AIR rPODB is a wireless, battery-powered wall switch including toggle and/or raise lower features with optional multi-pole control. It provides a user with local control of a lighting zone. A true wire-free switch, these single gang decorator style devices have soft-click buttons, and a green LED indicator for each button. The rPODB wall switches communicate wirelessly with other nLight AIR devices. A battery-powered wall switch can work with any nLight AIR enabled fixture or power pack to provide toggle switch operation. Wall switches with the DX option have a raise/lower ability to adjust the level of any nLight AIR controlled dimmable light fixture. With optional 2 or 4 scene switches, a customized scene can be created for groups of fixtures to quickly and easily control the lights to desired levels in the space.

The SC810 is a simple to use DMX controller and scene playback device, capable of local, independent control of 512 channels of DMX and 18 user defined, recordable scenes. This device can be programmed as a standalone device or connect to a DMX chain with another controller and can snapshot up to 18 scenes to be recalled at the push of a button or slide of a fader. It’s the perfect solution for any installation requiring seamless architectural control of DMX512 lighting systems controlling LED and conventional lighting.

The HALEON series of fixture integrated occupancy sensors with dimming photocells are ideal for standalone industrial lighting control applications. The HALEON sensor is designed to be used with eldoLED or similar LED drivers with 0-10 V, 12-24 VDC auxiliary power and stand-by mode. HALEON has the flexibility to change settings with the Sensor Switch® VLP mobile app using flash programing or optional Bluetooth® communication.

ConnectWorks Connected Lighting System powered by CIMCON provides cities, utilities, departments of transportation and universities with simple, easy-to-manage, interactive solutions for outdoor street, roadway and utility lighting applications. End-users gain the ability to monitor and control their lighting infrastructure in real-time, while creating a scalable wireless ecosystem that can integrate with other smart grid platforms and key city services. The system provides asset management and real-time fixture status including automated fault detection and notifications for efficient maintenance.

The WSX D wall switch combines 0-10V dimming, passive dual technology occupancy sensing and automatic dimming photocontrols capabilities into a single device. The WSX D is the perfect solution in spaces where multiple energy saving strategies are required.

Meet Juno AI. A 6" LED downlight fixture that not only illuminates a room, but also locks the doors, schedules appointments, adjusts your thermostat, tells your family dinner is ready, runs the vacuum, reads you a book, dims the lights for movie night ... the list is endless. Juno AI controls any smart home device that works with Alexa. And it's virtually invisible in your ceiling ... so say goodbye to countertop clutter and crank up the music. 

A self hosted portal for a small system and/or single site customers, pre-configured with ROAMview software. - Interactive map of installation area -Daily reports of each fixture -Grouping of devices -Schedule and even control commands -Windows 10 Professional