LIGHTING PRODUCTS

The DP Series photocontrols utilize premium components and silicon light sensors which resist long-term drift of the turn-on level. The power-up delay option prevents the control from activating for 45-60 seconds after power is applied. This allows lamp warm-up time so the installer can verify the system is working properly. It also allows for the system to be easily tested in the future. When power is shut off and then reconnected (at the pole base) and the lamp turns on briefly and then turns off, it confirms that the control, fixture, lamp and voltage supply are working correctly.

The DTL Connect Series photocontrol and remote empowers utilities to enable and disable difficult-to-access areas and security lights from the ground with the touch of a button. Built upon the robust, long-life design of the DLL Elite, the easy-to-retrofit DTL Connect Series photocontrol and remote offers long-life relay performance and superior surge protection.

The DPN Series photocontrols were specifically designed to turn the light off halfway through the night to save energy and extend fixture life.

Dimonoff | SCMS is the only lighting control platform on the market that allows multi-network interoperability as well as multi-device interoperability. Every lighting infrastructure manager from the public and private sector can use Dimonoff | SCMS to remotely access, monitor and control their lights equipped with controllers. Other features include automatic energy and alarms reporting, floor plan management, as well as the management of many other IoT devices, independently of manufacturer, all within one single user interface.

The NX Specialty Switch Station provides manual control of the NX System. The NX Switch Stations include an On/Off switch, an On/Raise/Lower/Off switch, a 4-button Preset switch for scene control, a Scene Switch with 4 presets plus Raise/Lower, a Raise/Lower dimmer switch and a Timed On switch. All Switch Stations provide plug and play integration with the wired or wireless NX Room Controllers or Smart Port Module.

The nLight AIR wireless rSBOR outdoor pole and fixture mount motion and photosensor simplifies retrofits of existing 0-10V luminaires by eliminating the need to pull communication wires between devices. Utilizing Passive Infrared (PIR) detection technology to detect walking-size motion while preventing false tripping from the environment. The rSBOR is designed to mount directly through a ½” knockout (7/8” hole) in a luminaire or pole, and features a dual radio that allows it to communicate wireless to other nLight AIR devices in order to enable control strategies like group response to motion, on/off control in response to daylight and by switch.

Part of the Dimonoff wireless lighting control technology suite, the third-generation Gateway G3 enables communications between the Smart Wireless Lighting Relay and Dimonoff | SCMS and DOO-Express software platform. Each gateway autonomously manages a group of nodes, removing any dependency on a central server for normal operation and making the system redundant and robust.

The nLight nPP16 Series power pack is the workhorse of an nLight system. Each unit has two important responsibilities: providing system power and switching lighting loads. To provide system power, the power pack transforms Class 1 line voltage (120/277 VAC or 347 VAC) to Class 2 15 VDC. For switching a lighting load, an internal 16A latching relay is used.

Each ROAM wireless outdoor lighting management system gateway receives data and transmits commands to ROAM nodes, with each one communicating with up to 2,000 devices. ROAM gateways are mounted on poles or attached to buildings, and uplink via Ethernet communication, or, in the case of ROAM, also by cellular link.

The NX Smart Switch provides manual control of the NX System. Each button has an LED status indicator and can be configured to control individual loads or groups of loads. Smart switches are addressable and connect to a system SmartPORT™ with a standard Cat5e patch cable. Up to eight switches can be connected in series to one SmartPORT on a NX Room Controller or NX SmartPORT Module. The attractive decorator style form factor allows ganging and use of standard decorator style wall plates.

The SBO BTP series of fixture mount occupancy sensors are rated for outdoor use with dimming photocells, making it ideal for indoor standalone industrial lighting control applications requiring an IP66 wet location rating. With its clean design and reliable performance, the SBO BTP sensor offers 100% digital passive infrared (PIR) technology that’s tuned for walking size motion, helping to achieve code compliance without compromising the aesthetic of the light fixture or the space created. The versatile SBO BTP sensor is optimized to perform at a variety of mounting heights typical of industrial applications.

The SBG BTP fixture integrated occupancy sensors with dimming photocells are ideal for indoor stand-alone industrial lighting control applications requiring an IP66 wet location rating. Easy to install and configure, the Sensor Switch® VLP mobile app allows you to change settings using visible light programming or Bluetooth® communication.

The SC810 is a simple to use DMX controller and scene playback device, capable of local, independent control of 512 channels of DMX and 18 user defined, recordable scenes. This device can be programmed as a standalone device or connect to a DMX chain with another controller and can snapshot up to 18 scenes to be recalled at the push of a button or slide of a fader. It’s the perfect solution for any installation requiring seamless architectural control of DMX512 lighting systems controlling LED and conventional lighting.

The SBOR Series outdoor rated sensor incorporates passive infrared (PIR) technology into a line powered motion sensor. Designed to mount directly through a 1/2 inch knockout (7/8 inch diameter hole) in a light fixture or pole, the SBOR utilizes 100% Digital Passive Infrared (PIR) technology that is tuned for walking size motion while preventing false tripping from the environment.

Easyl™ is a DMX512 controller featuring an LCD touchscreen. Easyl's powerfully simple interface enables intuitive control of an entire universe (512 channels) of color changing luminaires. Pre-programmed shows with static and color changing effects simplify initial setup and provide a great starting point for customization. Easyl provides design, edit, store and recall functions for a maximum of 12 shows and features quick-adjust intensity and speed sliders. Easyl controls LED luminaires that are DMX512-A compliant , including those with RDM functionality.

The WSX family of wall switch occupancy sensors provide simple and cost-effective solutions for commercial and residential lighting control applications. With your choice of passive infrared (PIR) or dual technology (PDT) with PIR plus patented Microphonics™ detection, the WSX family provides reliable sensing and dimming performance optimized for your space.

The HALEON series of fixture integrated occupancy sensors with dimming photocells are ideal for standalone industrial lighting control applications. The HALEON sensor is designed to be used with eldoLED or similar LED drivers with 0-10 V, 12-24 VDC auxiliary power and stand-by mode. HALEON has the flexibility to change settings with the Sensor Switch® VLP mobile app using flash programing or optional Bluetooth® communication.

The DTL DSN solution combines the reliability of the DLL Elite photocontrol, designed for 20-year operating life, with the performance of the Itron network platform for unparalleled functionality and adaptive control of street lighting systems. With the DSN solution, you now have access to a multi-application platform, providing one network for critical infrastructure solutions like smart lighting, smart metering and other outdoor IoT technologies.

Philips EasySense SNS200 is a fixture-mount lighting controller that is DLC certified and is compatible with Philips Advance Xitanium SR indoor LED drivers. It integrates occupancy sensing and daylight harvesting into a cost-effective and compact form factor. It also supports advanced network lighting control functionalities such as task tuning and group occupancy sharing. One can easily configure the SNS200 using a compatible smart phone. It is targeted for building owners or tenants who want energy savings and code compliance without a central server or gateway.

The SC810 Scene Creator is designed to be a stand-alone DMX control station that can be used as a backup when your main lighting console is not in use. It can playback eighteen scenes via push button presets or control faders that provide scene adjustments in real time control. Scenes can include all 512 DMX channels in a single universe. The SC810 is available in both wall mount or desk top versions. Local lockout when DMX is present from an alternate control source provides seamless switching between the SC810 and your main DMX control. Scenes can be recorded using the on board programming or via snapshot recording from another DMX source. User defined fade time from 0-55 seconds can be assigned to any of the push button presets. For more information go to http://www.lightronics.com/architectural_controllers_sc810.html or call us today at 1 800 472 8541.