LIGHTING PRODUCTS

The Wattstopper FSP-300 Series Passive Infrared Outdoor Sensor with Bluetooth low energy technology communication is designed to add enhanced security while improving commissioning of lighting projects with wireless access, eliminating the need to use ladders or tools. This sensor provides intensity control of 0-10V LED drivers or ballasts and on/off control of non-dimming ballasts based on motion or daylight contribution. Photosensor and daylight capabilities add a dusk-to-dawn control option for unmatched sequence of operation flexibility. The FSP-300 Series sensors are available in three models providing different options for mounting inside a fixture, outside a fixture via 1/2” knockout, or to a pole.

Meet Juno AI. A 6" LED downlight fixture that not only illuminates a room, but also locks the doors, schedules appointments, adjusts your thermostat, tells your family dinner is ready, runs the vacuum, reads you a book, dims the lights for movie night ... the list is endless. Juno AI controls any smart home device that works with Alexa. And it's virtually invisible in your ceiling ... so say goodbye to countertop clutter and crank up the music. 

ConnectWorks Connected Lighting System powered by CIMCON provides cities, utilities, departments of transportation and universities with simple, easy-to-manage, interactive solutions for outdoor street, roadway and utility lighting applications. End-users gain the ability to monitor and control their lighting infrastructure in real-time, while creating a scalable wireless ecosystem that can integrate with other smart grid platforms and key city services. The system provides asset management and real-time fixture status including automated fault detection and notifications for efficient maintenance.

Distributed Low Voltage Power (DLVP) system blends the benefits of both AC and DC power distribution, reducing installation labor by up to 40 percent and total installed cost of an LED lighting and controls project by up to 20 percent, while providing a completely flexible and electrically efficient solution. The system is designed for applications with repeated and matching configurations, such as schools, private and open offices, conference rooms, corridors/halls and stairwells.

The nLight® AIR rPODBA is a wireless, battery-powered wall switch including toggle, on/off, raise lower, and preset scenes featuring optional multi-pole control. It provides a sleek, modern design that enhances the aesthetic of a space giving users local control of lighting zones. Equipped with our innovative screwless wall plate design and CLAIRITY Pro mobile app make for easy installation and programming. The rPODBA is designed for any nLight AIR enabled fixture or power pack delivering an ideal solution for commercial office, hospitality, education, and industrial applications.

The DD Series photocontrols were designed specifically to detect and disable cycling HPS lamps. Disabling the fixture when the lamp cycles will extend the life of the starter and help reduce replacement costs.

Each ROAM wireless outdoor lighting management system gateway receives data and transmits commands to ROAM nodes, with each one communicating with up to 2,000 devices. ROAM gateways are mounted on poles or attached to buildings, and uplink via Ethernet communication, or, in the case of ROAM, also by cellular link.

The NX Daylight Sensor provides the necessary daylight-level information to the NX network.Using a photodiode element, the daylight sensor continuously measures daylight levels and sends the information to the network devices which then perform daylight switching or dimming functionality based on the amount of natural light in the area.

Philips EasySense SNS200 is a fixture-mount lighting controller that is DLC certified and is compatible with Philips Advance Xitanium SR indoor LED drivers. It integrates occupancy sensing and daylight harvesting into a cost-effective and compact form factor. It also supports advanced network lighting control functionalities such as task tuning and group occupancy sharing. One can easily configure the SNS200 using a compatible smart phone. It is targeted for building owners or tenants who want energy savings and code compliance without a central server or gateway.

Input interface LMIN-104 allows third-party devices to connect to the Wattstopper Digital Lighting Management (DLM) lighting control system. It includes four 24VDC input terminals and can be programmed to accept maintained or momentary switch closure inputs. Input signals can come from a wide variety of devices, including building automation systems, time clocks, and key switches for partition control, load shedding, and after hour cleaning of spaces. Additionally, the LMIN-104 can accept inputs from two existing DLM analog photocells.

The VERTEX series of luminaire-embedded occupancy and ambient light sensors are ideal for standalone or network commercial lighting control applications. The VERTEX's ultra-small footprint enables seamless integration into a luminaire without disrupting aesthetics or requiring additional mounting space.

A Sequence of Operation design tool for LMCS for configuring the Wattstopper Digital Lighting Management is adding convenience and simplifying code compliance by pre-populating documents such as room diagrams and bill of materials (BOM), and generating sequences of operation based on the specific energy code chosen. And as part of a connected Wattstopper DLM lighting control platform, new templates are automatically updated from the Wattstopper online library of code templates as new code changes are introduced. This is especially important as several states will be transitioning, or have recently transitioned to new building codes.

The nLight AIR wireless rSBOR outdoor pole and fixture mount motion and photosensor simplifies retrofits of existing 0-10V luminaires by eliminating the need to pull communication wires between devices. Utilizing Passive Infrared (PIR) detection technology to detect walking-size motion while preventing false tripping from the environment. The rSBOR is designed to mount directly through a ½” knockout (7/8” hole) in a luminaire or pole, and features a dual radio that allows it to communicate wireless to other nLight AIR devices in order to enable control strategies like group response to motion, on/off control in response to daylight and by switch.

The nPODM Series WallPods are nLight-enabled toggle and/or dimming switches that provide a user with local control of a lighting zone. These single gang decorator style devices have soft-click buttons and have a green LED indicator for each button. WallPods communicate with other nLight devices via a CAT-5 cable that connects to one of its two RJ-45 connectors. A basic low voltage WallPod can work with an nLight power pack or line voltage sensor to provide toggle switch operation. WallPods with the DX dimming option have the added ability to adjust the level of any nLight controlled dimmable lighting.

Functional Devices is proud to offer a panel mount relay for lighting control, which includes a mechanical latching output with 24Vac/dc momentary pulse control. We provide a 20 Amp standard ballast, with a 16 Amp electronic ballast rating for both on/off capabilities. Our relay options give you the flexibility for either a 2-wire status report (FDL20ALRMU) or by an auxiliary contact output (FDL20ALRM2U) for low voltage status feedback. The FDL20ALRMU is unique, our status reporting comes from the contact output side of the relay and not that of the control side, giving you actual feedback, the load is active. Both models include an override manual switch for status control at the panel if required.

The nLight AIR rPP family of power packs are lighting control devices designed to offer flexible control for commercial and industrial lighting applications. The rPP20 consists of a relay, 0-10V dimming control, and a low voltage power supply output to power and wireless switches and sensors. The rPP20 is capable of switching loads up to 20A via a latching relay designed with robust inrush protection from the harsh switching requirements of fluorescent and LED loads. Select power packs provide +24VDC low voltage output to power up to 4 nLight AIR mounted occupancy sensors and photocells.

The SBOR Series outdoor rated sensor incorporates passive infrared (PIR) technology into a line powered motion sensor. Designed to mount directly through a 1/2 inch knockout (7/8 inch diameter hole) in a light fixture or pole, the SBOR utilizes 100% Digital Passive Infrared (PIR) technology that is tuned for walking size motion while preventing false tripping from the environment.

Designed for a 20-year operating life with superior inrush current and surge-protection features, the DLL Elite photocontrol supports the extended life and low maintenance benefits associated with LED fixtures.

The NXBTR Bluetooth Radio Module provides a wireless communication bridge between the NX Room Controller and an iOS® or Android™ smart phone app.The compact module plugs into an RJ45 Smart Port jack either directly on the NX Room Controller or on a NX Smart Switch that is in turn connected to the NX Room Controller. The NXBTR uses the Bluetooth LE technology allowing the radio to easily pair with the smart phone when placed in close proximity. Communication with the RC for setup and control requires installation of the NXRC Android App or NXRC iOS App on the smart phone.

The nLight® UNITOUCH is an integrated touchscreen wall switch providing seamless control of multiple luminaires and devices on the nLight lighting controls platform through a single piece of glass, and wirelessly through the myPersonify mobile app. Blending modern design and an enhanced user experience, the nLight® UNITOUCH is ideal for commercial, higher education, hospitality, and retail applications.