LIGHTING PRODUCTS

The Wattstopper FSP-300 Series Passive Infrared Outdoor Sensor with Bluetooth low energy technology communication is designed to add enhanced security while improving commissioning of lighting projects with wireless access, eliminating the need to use ladders or tools. This sensor provides intensity control of 0-10V LED drivers or ballasts and on/off control of non-dimming ballasts based on motion or daylight contribution. Photosensor and daylight capabilities add a dusk-to-dawn control option for unmatched sequence of operation flexibility. The FSP-300 Series sensors are available in three models providing different options for mounting inside a fixture, outside a fixture via 1/2” knockout, or to a pole.

The HALEON series of fixture integrated occupancy sensors with dimming photocells are ideal for standalone industrial lighting control applications. The HALEON sensor is designed to be used with eldoLED or similar LED drivers with 0-10 V, 12-24 VDC auxiliary power and stand-by mode. HALEON has the flexibility to change settings with the Sensor Switch® VLP mobile app using flash programing or optional Bluetooth® communication.

The nLight® AIR wireless controls adapter is a device that connects your nLight AIR control system to the nLight ECLYPSE®. So for the first time, you can unlock the power of time-based controls and demand response, tap into the capabilities of ENVYSION™ and SensorView software, and enable a hybrid nLight wired and wireless control system with a single pane of glass. As part of the nLight AIR wireless controls family, the nLight AIR adapter uses a 900MHz communication frequency that easily penetrates obstructions and its five-tier security architecture helps building owners and occupants rest easy.

Wireless fixture dimming and monitoring now available in one control. -Wireless-enabled Communication -Remote On/Off/Dim Control -Zero Cross Relay Switching -Optional On-Board GPS

The push-button Dimming Switchpod Series of wall stations provide simple and cost effective solutions for commercial and residential lighting applications. Additionally, all SPODMRD sensors have a patent pending wiring method that enables them to function either with or without a neutral connection. SPODMRD units come pre-configured for wiring without a neutral, however, if a connection to neutral is required by code, contractors can convert the unit in seconds. 0-10V Dimming Miswire Protection Convertible Neutral to Ground Wiring Compatible with Acuity Brands Luminaires

The decorative utility ROAM node has all the features of the standard ROAM node, but is designed to accommodate Utility Style Decorative Fixtures.

The nLight nIO D / nIO 1S is a low voltage device that interfaces and provides network addressability for a variety of non-nLight devices. The nIO D is an output device that controls the dimming level of 0-10 VDC dimming ballasts / LED drivers. The nIO 1S is an input device that detects a toggle or momentary dry contact closure switch. Additionally, the nIO 1S can read a 0-10 VDC dimming control signal from non-nLight dimming photocells and wall dimmers.

The LightOWL Ceiling Mount Vacancy/ Occupancy Sensor is designed for large spaces with ceilings 12’ or higher such as cafeterias, auditoriums and warehouses. When a person passes into or out of a sensor zone, the sensor detects the motion and switches the lights ON. The lights will remain ON as long as there is an occupant in the room. When the space being monitored by the sensor is unoccupied the unit will automatically switch the lights OFF. LightOWL sensors utilize Smart IntelliDAPT™ Technology to analyze the controlled area and make digital adjustments to both sensitivity and timing settings for optimal performance, energy savings, and maintenance-free install-and-forget operation.

Input interface LMIN-104 allows third-party devices to connect to the Wattstopper Digital Lighting Management (DLM) lighting control system. It includes four 24VDC input terminals and can be programmed to accept maintained or momentary switch closure inputs. Input signals can come from a wide variety of devices, including building automation systems, time clocks, and key switches for partition control, load shedding, and after hour cleaning of spaces. Additionally, the LMIN-104 can accept inputs from two existing DLM analog photocells.

This new model offers “Phase Angle Dimming” capabilities for both incandescent and LED Driver loads where wireless technology is required. The EnOcean protocol gives Functional Devices the 902 MHz frequency for reliability to complete your projects. Also included is a maximum output of 600Wand the selectable choice for reverse or forward phase dimming, depending on your application.

Functional Devices is proud to offer a panel mount relay for lighting control, which includes a mechanical latching output with 24Vac/dc momentary pulse control. We provide a 20 Amp standard ballast, with a 16 Amp electronic ballast rating for both on/off capabilities. Our relay options give you the flexibility for either a 2-wire status report (FDL20ALRMU) or by an auxiliary contact output (FDL20ALRM2U) for low voltage status feedback. The FDL20ALRMU is unique, our status reporting comes from the contact output side of the relay and not that of the control side, giving you actual feedback, the load is active. Both models include an override manual switch for status control at the panel if required.

The nLight Wired nPODMA wall switch offers a sleek, modern design that enhances the aesthetic of a space giving users local control of lighting zones. Equipped with our innovative screwless wall plate design and nConfig mobile app make for easy installation and programming. The nPODMA uses CAT-5e cable connections to communicate with any nLight Wired fixture or power pack and is ideal for commercial office, hospitality, education, and industrial applications.

The nPODM Series WallPods are nLight-enabled toggle and/or dimming switches that provide a user with local control of a lighting zone. These single gang decorator style devices have soft-click buttons and have a green LED indicator for each button. WallPods communicate with other nLight devices via a CAT-5 cable that connects to one of its two RJ-45 connectors. A basic low voltage WallPod can work with an nLight power pack or line voltage sensor to provide toggle switch operation. WallPods with the DX dimming option have the added ability to adjust the level of any nLight controlled dimmable lighting.

The Sensor Switch VLP mobile app uses your mobile device to configure settings on VLP-enabled Sensor Switch occupancy sensors, photocontrols and luminaire-integrated sensors. Users can set occupancy time delay, trim values, photocontrol options and more with using VLP flash programming or Bluetooth® wireless technology:

The CMR is a line voltage sensor that easily mounts directly to a ceiling. Ceiling mount sensors are offered in a multitude of configurations which address many applications. Lens options include large motion extended range, small motion standard range and bi-directional for hallways. These sensors are capable of covering an entire private office or small room by themselves.

Functional Devices is proud to present our latest member to our Automatic Load Control Relay family, the ESRLBC. This newly designed model created with a new slim enclosure, allows for the sleek transition into linear lighting or anywhere fixture mount opportunities are available. This model offers the same robust quality our ESRN and ESRB, now including an isolated relay specific for the use with 0-10Vdc and DALI dimming options.

The Fresco RB combines aesthetics and performance in a digital wall station. The easy-to-install Fresco RB offers independently programmable buttons and custom engraving in 2-, 3-, 4-, 7- or 8-button configurations; and when connected over the Fresco network, users enjoy the ease and flexibility to control lighting and other devices. Pair it with a Fresco Touchscreen to perform functions like selecting lighting scenes, managing light levels and adjusting shades directly from the station.

The rCMS family of nLight AIR-enabled wireless ceiling/surface mount occupancy sensors provide a range of sensor solutions for applications with finished ceilings (e.g. ceiling tiles, sheetrock, plaster). The rCMS family sensors utilize digital Passive Infrared (PIR) detection and are available with several lens options, providing flexibility for multiple mounting height and coverage pattern requirements. Dual technology occupancy detection can also be added as an option for applications where occupants are stationary for long periods of time. All sensors have integrated on/off photocells, with automatic daylight harvesting/dimming control standard. Additionally, the rCMS family sensors are also available with an optional auxiliary low voltage relay for simple integration with a BMS system or other building system.

The NXBTR Bluetooth Radio Module provides a wireless communication bridge between the NX Room Controller and an iOS® or Android™ smart phone app.The compact module plugs into an RJ45 Smart Port jack either directly on the NX Room Controller or on a NX Smart Switch that is in turn connected to the NX Room Controller. The NXBTR uses the Bluetooth LE technology allowing the radio to easily pair with the smart phone when placed in close proximity. Communication with the RC for setup and control requires installation of the NXRC Android App or NXRC iOS App on the smart phone.

The OMNI Ceiling Mount Vacancy/ Occupancy Sensor is designed for medium to large spaces with ceilings up to 12’ in height. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant in the room. When the space being monitored by the sensor is unoccupied the unit will switch the lights OFF. For large spaces, up to four sensors can be linked together to control the lighting as a single group. This makes the OMNI sensor ideal for spaces such as cafeterias, classrooms, large bathrooms, offices with cubicles and more.