LIGHTING PRODUCTS

The Sunoptics SignatureTM Series is our highest performing skylight. Through its patented design featuring prismatic optics, SignatureTM Series skylights capture more light at low-light levels than any other passive skylight on the market today. They provide glare-free, UV-damage free, full-spectrum natural light. SignatureTM Series skylights are for use in open ceiling applications such as retail, warehouses, manufacturing, and areas with higher mounting heights. Optimize your energy savings by pairing the SignatureTM Series skylights with Acuity LED lighting and lighting controls to reduce your energy costs on lighting by 80-90%.

The DD Series photocontrols were designed specifically to detect and disable cycling HPS lamps. Disabling the fixture when the lamp cycles will extend the life of the starter and help reduce replacement costs.

The nLight® AIR rES7 sensor is an in-fixture, low voltage, digital sensor providing embedded wireless lighting control, digital dimming, occupancy detection and daylight harvesting capabilities. The rES7 is designed for mounting heights of up to 20 ft in indoor luminaries. The rES7 sensor provides Passive Infrared (PIR) occupancy detection over a 15-20 ft (4.57 - 6.10 m) radial coverage pattern and photocell light level detection in one compact low profile design with optional Dual Technology, which adds Microphonics™ to PIR detection. The rES7 sensor is ideal for occupancy and daylighting control in suspended or recessed luminaries.

The fixture embedded nLight® AIR network interface called the rIO is a low voltage wireless device providing individual fixture control and digital dimming capabilities within Acuity Brands® LED luminaires with eldoLED® brand drivers. This smart device results in the luminaire being “nLight AIR-enabled” — making it both addressable as well as capable of digitally communicating with other nLight AIR wireless controls such as occupancy sensors, photocells, and wall switches. This allows for advanced operation and design flexibility ranging from stand-alone rooms to building and campus-wide networks. As part of the nLight AIR wireless controls family, the rIO uses a 900MHz communication frequency that easily penetrates obstructions and its five-tier security architecture helps building owners and occupants rest easy.

The NX Specialty Switch Station provides manual control of the NX System. The NX Switch Stations include an On/Off switch, an On/Raise/Lower/Off switch, a 4-button Preset switch for scene control, a Scene Switch with 4 presets plus Raise/Lower, a Raise/Lower dimmer switch and a Timed On switch. All Switch Stations provide plug and play integration with the wired or wireless NX Room Controllers or Smart Port Module.

LiteStream C wireless controllers are easy to install for IoT applications in need of multi-channel, dimming, color tuning, zone, and RGB control capabilities. With a high power density of 30W/cubic inch, LiteStream C can be added at the output of any standard constant voltage LED driver. These controllers are compatible with smart home apps and are offered in three models: 1-channel for dimming, 2-channel/200W for color tuning, and 5-channel/300W for RGB+W controls. LiteStream’s innovative products are designed to maximize the reliable, secure, robust and user-friendly experience that you’ve come to expect from LTF products.

Designed for a 20-year operating life with superior inrush current and surge-protection features, the DLL Elite photocontrol supports the extended life and low maintenance benefits associated with LED fixtures.

The nLight® UNITOUCH is an integrated touchscreen wall switch providing seamless control of multiple luminaires and devices on the nLight lighting controls platform through a single piece of glass, and wirelessly through the myPersonify mobile app. Blending modern design and an enhanced user experience, the nLight® UNITOUCH is ideal for commercial, higher education, hospitality, and retail applications.

The nLight AIR rMSOD sensor is a low voltage, digital sensor providing embedded wireless control, digital dimming, occupancy detection and daylight harvesting capabilities in an outdoor or wet location listed luminaire. For motion detection, the sensor utilizes 100% Digital Passive Infrared (PIR) technology that is tuned for walking size motion while preventing false tripping from the environment. The unit’s integrated photocell enables additional energy savings during daytime periods when there is sufficient daylight.

ConnectWorks Connected Lighting System powered by CIMCON provides cities, utilities, departments of transportation and universities with simple, easy-to-manage, interactive solutions for outdoor street, roadway and utility lighting applications. End-users gain the ability to monitor and control their lighting infrastructure in real-time, while creating a scalable wireless ecosystem that can integrate with other smart grid platforms and key city services. The system provides asset management and real-time fixture status including automated fault detection and notifications for efficient maintenance.

The LightFlex™ LED Family from Sunoptics® is the industry’s first tubular daylighting system with integrated tunable-white LEDs and controls to provide natural daylight, tunable-white LED light or a combination of both — in the same system. Leveraging Acuity Brands’ Mainstream Dynamic™ platform with nLight® controls, LightFlex LED provides an optimal lighting system for interior commercial applications to support ones’ natural circadian rhythm. This is achieved by providing access to natural light throughout the day - while maintaining light levels for the task.

Nora features NEXUS, a revolutionary all-in-one driver/dimmer for LED products, including Nora LED lightbars, Nora LED puck lights and Nora LED tape lights and Nora LED flex lights. NEXUS simplifies design and installation by combining an in-wall LED dimmer switch and power supply into a single integrated unit that mounts into a standard in-wall switch box. This eliminates compatibility issues between driver and dimmer. NEXUS is available in 12V (60W) or 24V (100W) and provides 100% to 5% dimming. A white face plate is included and an optional face plate kit with black, brown or almond plates is available.

The HALEON series of fixture integrated occupancy sensors with dimming photocells are ideal for standalone industrial lighting control applications. The HALEON sensor is designed to be used with eldoLED or similar LED drivers with 0-10 V, 12-24 VDC auxiliary power and stand-by mode. HALEON has the flexibility to change settings with the Sensor Switch® VLP mobile app using flash programing or optional Bluetooth® communication.

The nLight® AIR rPODL is a wireless, line-powered wall switch providing a user with local control of a lighting zone featuring toggle and/or raise lower with optional multi-pole control in a single gang decorator style with soft-click buttons. Ideal for commercial office, education, healthcare, municipalities, and retail renovation projects, the rPODL helps to save installation time using existing wiring, while offering more wall switch design options for nLight projects. The rPODL wall switch communicates wirelessly with other nLight AIR devices. The rPODL wall switch can work with any nLight AIR enabled fixture or power pack to provide toggle switch operation. Wall switches with the DX option have a raise/lower ability to adjust the level of any nLight AIR controlled dimmable light fixture. With optional 2 or 4 scene switches, a customized scene can be created for groups of fixtures to quickly and easily control the lights to desired levels in the space.

WaveLinx Wireless Connected Lighting System is a simple to install, “no new wires” system that eliminates the cost and complexity of meeting code and programming advanced control systems while providing a flexible and reconfigurable wireless topology for on the fly space adjustments through a mobile app. Well suited for small and medium offices spaces and educational environments, the system lays the foundation for future data analytics by providing a connection to the building network and collecting data through one of the industry’s smallest fixture integrated sensor.

Wireless DMX Track Feeds are used to add Wireless DMX control into any CONTROLTrack installation. Our patented Wireless DMX Track Feed receives data wirelessly from a Multiverse® Transmitter or Node and outputs a DMX signal to the CONTROLTrack and DMX fixtures. Each Wireless DMX Feed can control up to 32 fixtures and can transmit DMX across 300’ of track.

Dimmer controls and smoothly dims low voltage lighting loads, including the latest LED and fluorescent fixtures. The DCLV2 is ideal for LED lighting renovations, retrofits, and new construction projects. The dimmer combines aesthetics and function and can meet advanced energy code requirements. Manual-On or Partial-On settings are what sets the DCLV2 apart from other dimmers. It controls large loads of up to 100 ballasts wired in parallel for larger application spaces.

Dimonoff | SCMS is the only lighting control platform on the market that allows multi-network interoperability as well as multi-device interoperability. Every lighting infrastructure manager from the public and private sector can use Dimonoff | SCMS to remotely access, monitor and control their lights equipped with controllers. Other features include automatic energy and alarms reporting, floor plan management, as well as the management of many other IoT devices, independently of manufacturer, all within one single user interface.

The NX Area Controller allows any PC with an Internet Explorer® compatible browser to interface with the NX Networked Lighting Control System through a built-in web server. The NX Area Controller provides an easy-to-use and highly intuitive graphical user interface (GUI). System users can easily program, monitor and control (locally or remotely) the functions of the NX lighting controls system conveniently from their PC—all without installing software. "

IOTA’s IIS Series Inverter Systems offer ideal emergency solutions for today’s LED lighting loads of 125W to 375W. Avoid the challenge of varying LED requirements by implementing a central inverter unit that will provide the emergency power that’s right for your load. A properly-sized unit can meet all the demands of your emergency fixtures for indoor and outdoor paths of egress. With the capability to operate incandescent and fluorescent fixtures as well as LEDs, the IIS Series provides specifiers with a simple UL 924 Listed solution for multiple fixtures.