LIGHTING PRODUCTS

The Fresco RB combines aesthetics and performance in a digital wall station. The easy-to-install Fresco RB offers independently programmable buttons and custom engraving in 2-, 3-, 4-, 7- or 8-button configurations; and when connected over the Fresco network, users enjoy the ease and flexibility to control lighting and other devices. Pair it with a Fresco Touchscreen to perform functions like selecting lighting scenes, managing light levels and adjusting shades directly from the station.

The LightOWL Ceiling Mount Vacancy/ Occupancy Sensor is designed for large spaces with ceilings 12’ or higher such as cafeterias, auditoriums and warehouses. When a person passes into or out of a sensor zone, the sensor detects the motion and switches the lights ON. The lights will remain ON as long as there is an occupant in the room. When the space being monitored by the sensor is unoccupied the unit will automatically switch the lights OFF. LightOWL sensors utilize Smart IntelliDAPT™ Technology to analyze the controlled area and make digital adjustments to both sensitivity and timing settings for optimal performance, energy savings, and maintenance-free install-and-forget operation.

The LightFlex™ LED Family from Sunoptics® is the industry’s first tubular daylighting system with integrated tunable-white LEDs and controls to provide natural daylight, tunable-white LED light or a combination of both — in the same system. Leveraging Acuity Brands’ Mainstream Dynamic™ platform with nLight® controls, LightFlex LED provides an optimal lighting system for interior commercial applications to support ones’ natural circadian rhythm. This is achieved by providing access to natural light throughout the day - while maintaining light levels for the task.

The nLight® AIR rES7 sensor is an in-fixture, low voltage, digital sensor providing embedded wireless lighting control, digital dimming, occupancy detection and daylight harvesting capabilities. The rES7 is designed for mounting heights of up to 20 ft in indoor luminaries. The rES7 sensor provides Passive Infrared (PIR) occupancy detection over a 15-20 ft (4.57 - 6.10 m) radial coverage pattern and photocell light level detection in one compact low profile design with optional Dual Technology, which adds Microphonics™ to PIR detection. The rES7 sensor is ideal for occupancy and daylighting control in suspended or recessed luminaries.

Meet Juno AI. A 6" LED downlight fixture that not only illuminates a room, but also locks the doors, schedules appointments, adjusts your thermostat, tells your family dinner is ready, runs the vacuum, reads you a book, dims the lights for movie night ... the list is endless. Juno AI controls any smart home device that works with Alexa. And it's virtually invisible in your ceiling ... so say goodbye to countertop clutter and crank up the music. 

The nLight® AIR rPODBA is a wireless, battery-powered wall switch including toggle, on/off, raise lower, and preset scenes featuring optional multi-pole control. It provides a sleek, modern design that enhances the aesthetic of a space giving users local control of lighting zones. Equipped with our innovative screwless wall plate design and CLAIRITY Pro mobile app make for easy installation and programming. The rPODBA is designed for any nLight AIR enabled fixture or power pack delivering an ideal solution for commercial office, hospitality, education, and industrial applications.

The DSW Series photocontrol mounts to wall-mounted luminaires and electrical boxes. It can swivel 360~176; around its base and 180~176; from front to back.

To take energy-savings to the next level, take control of your outdoor lighting. Wireless technology is the latest frontier in aggressive energy-saving strategies; it offers faster value creation and significant benefits over traditional wired solutions. wiSCAPE™ brand controls from Hubbell Control Solutions offer you radically smart solutions for new construction or retrofit applications. Beside the cost of electricity, owners and managers deal with associated lighting expenses daily. Replacing failed lamps or fixtures and managing the crews, tools and service trucks that service them. Now you can reduce costs while improving performance and security.

The HCS WASP2 and Dimming WASP are intelligent Passive Infrared (PIR) vacancy/occupancy sensors. The occupancy sensing feature maximizes energy savings by turning lights off or going to preset dimmed settings to provide optimal safety and security for the user. The WASP2 and Dimming WASP support mounting heights from 18 to 45 feet and feature multiple outputs and mounting options for versatility. The WASP sensors are ideal for a variety of applications such as parking garages, area/site lighting, pathways, warehouses, storage areas, stairwells and more.

The DTL DSN solution combines the reliability of the DLL Elite photocontrol, designed for 20-year operating life, with the performance of the Itron network platform for unparalleled functionality and adaptive control of street lighting systems. With the DSN solution, you now have access to a multi-application platform, providing one network for critical infrastructure solutions like smart lighting, smart metering and other outdoor IoT technologies.

The NX Room Controller integrates automatic and manual control of lighting with the simplicity of plug-in installation and auto-configuration for an affordable way to meet those energy codes and provide intuitive, energy saving lighting controls for a single room or space.

The DD Series photocontrols were designed specifically to detect and disable cycling HPS lamps. Disabling the fixture when the lamp cycles will extend the life of the starter and help reduce replacement costs.

The DP Series photocontrols utilize premium components and silicon light sensors which resist long-term drift of the turn-on level. The power-up delay option prevents the control from activating for 45-60 seconds after power is applied. This allows lamp warm-up time so the installer can verify the system is working properly. It also allows for the system to be easily tested in the future. When power is shut off and then reconnected (at the pole base) and the lamp turns on briefly and then turns off, it confirms that the control, fixture, lamp and voltage supply are working correctly.

Wireless DMX Track Feeds are used to add Wireless DMX control into any CONTROLTrack installation. Our patented Wireless DMX Track Feed receives data wirelessly from a Multiverse® Transmitter or Node and outputs a DMX signal to the CONTROLTrack and DMX fixtures. Each Wireless DMX Feed can control up to 32 fixtures and can transmit DMX across 300’ of track.

ConnectWorks Connected Lighting System powered by CIMCON provides cities, utilities, departments of transportation and universities with simple, easy-to-manage, interactive solutions for outdoor street, roadway and utility lighting applications. End-users gain the ability to monitor and control their lighting infrastructure in real-time, while creating a scalable wireless ecosystem that can integrate with other smart grid platforms and key city services. The system provides asset management and real-time fixture status including automated fault detection and notifications for efficient maintenance.

The nLight Wired nPODMA wall switch offers a sleek, modern design that enhances the aesthetic of a space giving users local control of lighting zones. Equipped with our innovative screwless wall plate design and nConfig mobile app make for easy installation and programming. The nPODMA uses CAT-5e cable connections to communicate with any nLight Wired fixture or power pack and is ideal for commercial office, hospitality, education, and industrial applications.

The WSX D wall switch combines 0-10V dimming, passive dual technology occupancy sensing and automatic dimming photocontrols capabilities into a single device. The WSX D is the perfect solution in spaces where multiple energy saving strategies are required.

LightConSys offers a wide range of IoT-based PWM LED lighting control solutions for both wired and wireless network connection. It can also be powered by your existing PoE networking infrastructure for smart lighting and smart city solutions. Simply using the PWM LED driver available in the market, the user can retrofit their LED lighting connected with our IoT gateway along with its simple to use web-based software for making smart lighting control. It may also further expand to vast of networking lighting control by linking to a cloud server for robust lighting monitoring and control applications.

The CMR is a line voltage sensor that easily mounts directly to a ceiling. Ceiling mount sensors are offered in a multitude of configurations which address many applications. Lens options include large motion extended range, small motion standard range and bi-directional for hallways. These sensors are capable of covering an entire private office or small room by themselves.

The nLight® AIR rPODB is a wireless, battery-powered wall switch including toggle and/or raise lower features with optional multi-pole control. It provides a user with local control of a lighting zone. A true wire-free switch, these single gang decorator style devices have soft-click buttons, and a green LED indicator for each button. The rPODB wall switches communicate wirelessly with other nLight AIR devices. A battery-powered wall switch can work with any nLight AIR enabled fixture or power pack to provide toggle switch operation. Wall switches with the DX option have a raise/lower ability to adjust the level of any nLight AIR controlled dimmable light fixture. With optional 2 or 4 scene switches, a customized scene can be created for groups of fixtures to quickly and easily control the lights to desired levels in the space.