LIGHTING PRODUCTS

The SBG BTP fixture integrated occupancy sensors with dimming photocells are ideal for indoor stand-alone industrial lighting control applications requiring an IP66 wet location rating. Easy to install and configure, the Sensor Switch® VLP mobile app allows you to change settings using visible light programming or Bluetooth® communication.

The NX Smart Switch provides manual control of the NX System. Each button has an LED status indicator and can be configured to control individual loads or groups of loads. Smart switches are addressable and connect to a system SmartPORT™ with a standard Cat5e patch cable. Up to eight switches can be connected in series to one SmartPORT on a NX Room Controller or NX SmartPORT Module. The attractive decorator style form factor allows ganging and use of standard decorator style wall plates.

These high abuse momentary switch assemblies are available in single-, dual-, and triple-gang models and compliment Visa Lighting behavioral health/high abuse lighting products. The face plate is machined from aluminum plate. Liberty can be used where switches are vulnerable to damage in high abuse and behavioral health applications. These low voltage switches are meant to pair with our LVPC-DIM controller.

The DPN Series photocontrols were specifically designed to turn the light off halfway through the night to save energy and extend fixture life.

The LightFlex™ LED Family from Sunoptics® is the industry’s first tubular daylighting system with integrated tunable-white LEDs and controls to provide natural daylight, tunable-white LED light or a combination of both — in the same system. Leveraging Acuity Brands’ Mainstream Dynamic™ platform with nLight® controls, LightFlex LED provides an optimal lighting system for interior commercial applications to support ones’ natural circadian rhythm. This is achieved by providing access to natural light throughout the day - while maintaining light levels for the task.

Functional Devices is proud to offer a panel mount relay for lighting control, which includes a mechanical latching output with 24Vac/dc momentary pulse control. We provide a 20 Amp standard ballast, with a 16 Amp electronic ballast rating for both on/off capabilities. Our relay options give you the flexibility for either a 2-wire status report (FDL20ALRMU) or by an auxiliary contact output (FDL20ALRM2U) for low voltage status feedback. The FDL20ALRMU is unique, our status reporting comes from the contact output side of the relay and not that of the control side, giving you actual feedback, the load is active. Both models include an override manual switch for status control at the panel if required.

The LSXR Family of fixture mount occupancy sensors provides reliable and versatile solutions for commercial and industrial lighting control applications. All LSXR Family sensors utilize 100% digital passive infrared (PIR) detection, power from switch line voltage and feature interchangeable lenses, providing flexibility for multiple mounting height and coverage pattern requirements. Available options include dual relays, HVOLT powering and an integrated switching/dimming photocell.

The nLight nIO D / nIO 1S is a low voltage device that interfaces and provides network addressability for a variety of non-nLight devices. The nIO D is an output device that controls the dimming level of 0-10 VDC dimming ballasts / LED drivers. The nIO 1S is an input device that detects a toggle or momentary dry contact closure switch. Additionally, the nIO 1S can read a 0-10 VDC dimming control signal from non-nLight dimming photocells and wall dimmers.

The DP Series photocontrols utilize premium components and silicon light sensors which resist long-term drift of the turn-on level. The power-up delay option prevents the control from activating for 45-60 seconds after power is applied. This allows lamp warm-up time so the installer can verify the system is working properly. It also allows for the system to be easily tested in the future. When power is shut off and then reconnected (at the pole base) and the lamp turns on briefly and then turns off, it confirms that the control, fixture, lamp and voltage supply are working correctly.

The nLight nPP16 Series power pack is the workhorse of an nLight system. Each unit has two important responsibilities: providing system power and switching lighting loads. To provide system power, the power pack transforms Class 1 line voltage (120/277 VAC or 347 VAC) to Class 2 15 VDC. For switching a lighting load, an internal 16A latching relay is used.

The LSX BTP fixture mounted occupancy sensor with dimming photocell is ideal for indoor standalone industrial lighting control applications. The versatile LSX sensor is optimized to perform at a variety of mounting heights typical of industrial applications.

The decorative utility ROAM node has all the features of the standard ROAM node, but is designed to accommodate Utility Style Decorative Fixtures.

The RTM can supplant legacy products like control panels, wired systems and ordinary motion-sensor circuit relays. It is a compact addressable module that enables wireless control, monitoring and metering facilitating the creation of a smart lighting control system. It features digital and analog inputs and outputs which enable the integration of different sensors. Without wire to run, it simplifies control and automation projects especially in any type of retrofit lighting application, including decorative lighting. The RTM relay is designed to be installed inside any fixture or in a NEMA4 enclosure for indoor or outdoor applications.

LumaWatt Pro Connected Lighting System powered by Enlighted allows enterprise customers to take advantage of the system’s advanced light-emitting diode (LED) lighting technologies and wireless sensing capabilities to acquire actionable, granular data on lighting energy performance, space utilization, real time location services and building system integration. The simplified system delivers a highly advanced Internet of Things (IoT) solution to gain operational efficiencies that go beyond lighting. This connected lighting and sensor solution for indoor and outdoor spaces is ideal for large commercial offices, industrial/manufacturing spaces and healthcare facilities.

The CM is a low voltage sensor that easily mounts directly to a ceiling tile or a metallic grid. Ceiling mount sensors are offered in a multitude of configurations which address many applications. Lens options include large motion extended range, small motion standard range and bi-directional for hallways. Multiple low voltage sensors can work together to supply the ideal solution for oddly shaped rooms or large open office areas. For rooms with obstructions, these sensors are also offered with Dual Technology, which adds Microphonics™ detection to the Passive Infrared (PIR) detection.

SiteSync Lighting Control delivers flexible control strategies for reducing power consumption and minimizing maintenance costs while delivering the right light levels with a simple and affordable wireless solution.

The DBE Series photocontrols are button style controls designed to be installed with lighting that does not use a NEMA receptacle.

The nLight® AIR rPODB is a wireless, battery-powered wall switch including toggle and/or raise lower features with optional multi-pole control. It provides a user with local control of a lighting zone. A true wire-free switch, these single gang decorator style devices have soft-click buttons, and a green LED indicator for each button. The rPODB wall switches communicate wirelessly with other nLight AIR devices. A battery-powered wall switch can work with any nLight AIR enabled fixture or power pack to provide toggle switch operation. Wall switches with the DX option have a raise/lower ability to adjust the level of any nLight AIR controlled dimmable light fixture. With optional 2 or 4 scene switches, a customized scene can be created for groups of fixtures to quickly and easily control the lights to desired levels in the space.

The nLight® AIR wireless controls adapter is a device that connects your nLight AIR control system to the nLight ECLYPSE®. So for the first time, you can unlock the power of time-based controls and demand response, tap into the capabilities of ENVYSION™ and SensorView software, and enable a hybrid nLight wired and wireless control system with a single pane of glass. As part of the nLight AIR wireless controls family, the nLight AIR adapter uses a 900MHz communication frequency that easily penetrates obstructions and its five-tier security architecture helps building owners and occupants rest easy.

The push-button Dimming Switchpod Series of wall stations provide simple and cost effective solutions for commercial and residential lighting applications. Additionally, all SPODMRD sensors have a patent pending wiring method that enables them to function either with or without a neutral connection. SPODMRD units come pre-configured for wiring without a neutral, however, if a connection to neutral is required by code, contractors can convert the unit in seconds. 0-10V Dimming Miswire Protection Convertible Neutral to Ground Wiring Compatible with Acuity Brands Luminaires